Texas Instruments DS92001TMAX/NOPB

DS92001TMAX/NOPB Overview
For convenience, power buffer comes packaged in 8-SOIC (0.154, 3.90mm Width).Currently, this power buffer is available for shipping in Tape & Reel (TR) packages.An easy-to-adapt universal mount.As far as types go, this is a typical Buffer, ReDriver.To operate this op amp buffer, it requires a voltage of 3V~3.6V volts.Input of CML, LVDS, LVPECL is enabled by it.For optimal performance, set the operating temperature to -40°C~85°C.In addition to BLVDS, this operational amplifier buffer may also be used for other applications.In order to find more pin-to-pin solutions that suit your specific needs, try searching with "DS92001".There are 8 terminals on the op amp buffer that you can find.During reflow, it reaches a temperature of 260.It is a splitter that can accomplish a wide range of demanding tasks with power supplied by 3.3V voltage.It outputs in LVDS.Pins on its 8 axis are present.Basically, it's a 50mA op amp buffer.A Surface Mount hole is available for mounting it on a PCB or another board.A power buffer like the power buffer plays a crucial role in the industry.Operating voltage 3.3V is required for normal operation.Receiver uses 4-Bit technology.In the most extreme case, this splitter dissipates 726mW watts.A 1 element interface repeater signal like this is used.

DS92001TMAX/NOPB Features
Mainly used in BLVDS.
A standard Line Driver or Receivers.
4-Bit receiver.

DS92001TMAX/NOPB Applications
There are a lot of Texas Instruments DS92001TMAX/NOPB Signal Buffers, Repeaters, Splitters applications.

Multidrop Buses
Digital Cross-Connects
Clock Distribution
Add/Drop Muxes
SATA SSDs or HDDs
Protection Switching
Digital Crossconnects
Communications Switchers
Network Switches/Routers
Storage Area Networks