Digi International DC-ME-Y413-LX-B

DC-ME-Y413-LX-B Overview
A MPU Core module or board is used in the microcontroller.There are ARM926EJ-S, NS9210 cores in the processor.The microcontroller is set to -40°C~80°C by default, which is the default setting.There is a flash size 8MB on the MCU electronics.An RJ45 connector has a RJ45 connector type.This MCUs belongs to the Digi Connect ME? Series of MCUs.A minimum RAM size of 16MB is set to enable the software to run normally.During operation, the MCU chip moves at 75MHz speed.75MHz frequency will not affect MCU chips accuracy.As of right now, 80°C is the maximum operational temperature.Operating temperatures should be warmer than -40°C.In micro controller's core, ARM architecture is used.A 3.3V volt supply powers this microcontrollers.In this case, FLASH, NOR, SDRAM has been chosen as the value for data storage.

DC-ME-Y413-LX-B Features
Core processor of ARM926EJ-S, NS9210
Flash size of 8MB
Speed of 75MHz
Core architecture of ARM

DC-ME-Y413-LX-B Applications
There are a lot of Digi DC-ME-Y413-LX-B Microcontroller, Microprocessor, FPGA Modules applications.

Human Machine Interface
Software Defined Radio
Human Machine Control Panel
Industrial Control
Embedded User Interfaces
Industrial Automation
Healthcare Monitoring
Process Control
Weighing Scales
Power Protection Systems