Digi International DC-EM-02T-NS

DC-EM-02T-NS Overview
The module or board type of the microcontroller is MPU Core.With ARM7TDMI, NS7520 cores, the processor drives microprocessor chip.The default setting of the microcontroller is -40°C~85°C.This MCU electronics has a size of 4MB in terms of its flash.Pin Header is the connector type.In the Digi Connect EM? series, this is one of the microcontrollers.Software runs normally with RAM size 8MB when the RAM size is reduced.In this MCU chip, the speed is set to 55MHz.55MHz frequency can still be used accurately.In addmicroprocessorion to that, microprocessor is packaged wmicroprocessorh Module.As of right now, 85°C is the maximum operational temperature at this time.Microprocessor should be warmer than -40°C when microprocessor is operating.In micro controller's core, ARM architecture is used.There is a 3.3V volt supply that powers this microcontrollers, which is used as its operating voltage.The chosen value for data storage is FLASH, NOR, SDRAM.Set the supply current of the MCUs to 270mA.In operation, microcontroller can output a maximum current of 270mA when microcontroller is operating at full power.

DC-EM-02T-NS Features
Core processor of ARM7TDMI, NS7520
Flash size of 4MB
Speed of 55MHz
Core architecture of ARM

DC-EM-02T-NS Applications
There are a lot of Digi DC-EM-02T-NS Microcontroller, Microprocessor, FPGA Modules applications.

Embedded Instrumentation
Industrial Gateways
Industrial Control
Embedded User Interfaces
Patient Monitoring
Healthcare Monitoring
Medical Devices
Data Acquisition
Portable Data Terminals
Process Control