Digi International DC-ME-01T-S-50

DC-ME-01T-S-50 Overview
A MPU Core module or board is used in the microcontroller.There are ARM7TDMI, NS7520 cores in the processor.In order to use the microcontroller, the default setting is -40°C~85°C.MCU electronics 2MB has a flash size of 2MB.Microprocessor chip is a type RJ45 connector.This MCUs belongs to the Digi Connect ME? Series of MCUs.As a result, the RAM size of the software has been reduced to 8MB in order to ensure that MCU chip runs normally.During operation, the MCU chip moves at 55MHz speed.MCU chip can continue to function accurately at 55MHz frequency.In addmicroprocessorion to that, microprocessor is packaged wmicroprocessorh Module.85°C is the maximum operational temperature at this time.A warmer temperature than -40°C is recommended when operating.The architecture it uses at micro controller's core is ARM.There is a 3.3V volt supply that powers this microcontrollers, which is used as its operating voltage.In this case, the value chosen for data storage is FLASH, NOR, SDRAM.In terms of packaging, microcontroller comes in a Box-shape.This MCUs has a 270mA supply current.In order to operate, microcontroller must have a maximum output current of 270mA.

DC-ME-01T-S-50 Features
Core processor of ARM7TDMI, NS7520
Flash size of 2MB
Speed of 55MHz
Core architecture of ARM
Box packaging

DC-ME-01T-S-50 Applications
There are a lot of Digi DC-ME-01T-S-50 Microcontroller, Microprocessor, FPGA Modules applications.

Medical Devices
Process Control
Human Machine Interface
Thermostat
Software Defined Radio
Test and Measurement
Power Protection Systems
Closed Loop Motor Control
Embedded User Interfaces
Portable Data Terminals