Digi International DC-ME-01T-C-10

DC-ME-01T-C-10 Overview
The microcontroller has been classified as a MPU Core type module or board.There are ARM7TDMI, NS7520 cores in its processor, which is what powers the microcontroller.It is default for the microcontroller to set the mode to -40°C~85°C.This MCU electronics has a size of 2MB in terms of its flash.RJ45' stands for connector type.Digi Connect ME?-Series.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 8MB.In this case, the MCU chip operates at a 55MHz speed.I am confident that microprocessor will continue to function accurately as long as microprocessor operates accurately at 55MHz frequency.Module package is included.Microprocessor chip is currently operating at 85°C°C, which is the maximum operational temperature.Microprocessor should be warmer than -40°C when operating.Program ARM relies on a proprietary architecture called ARM.An operating voltage of 3.3V volts is required to run this microcontrollers.Data storage is set to FLASH, NOR, SDRAM.There is a setting of 270mA for the supply current of the MCUs.

DC-ME-01T-C-10 Features
Core processor of ARM7TDMI, NS7520
Flash size of 2MB
Speed of 55MHz
Core architecture of ARM

DC-ME-01T-C-10 Applications
There are a lot of Digi DC-ME-01T-C-10 Microcontroller, Microprocessor, FPGA Modules applications.

Healthcare Monitoring
Industrial Instrumentation
Weighing Scales
Medical Devices
Human Machine Control Panel
Software Defined Radio
Embedded User Interfaces
Network Enabled Data Acquisition
Test and Measurement
Home and Building Automation