Cypress Semiconductor Corp CY2305SXI-1HT
- Part Number:
- CY2305SXI-1HT
- Manufacturer:
- Cypress Semiconductor Corp
- Ventron No:
- 2976424-CY2305SXI-1HT
- Description:
- IC CLK ZDB 5OUT 133MHZ 8SOIC
- Datasheet:
- CY2305SXI-1HT
Description
The CY2305/CY2309 is a low-cost 3.3 V zero delay buffer designed to distribute high speed clocks. It accepts one reference input, and drives out multiple low skew clocks. The CY2305 has five outputs, while the CY2309 has nine outputs, grouped as 4 4 1. Both devices have on-chip PLLs which lock to an input clock on the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad.
The CY2309 has two banks of four outputs each, which can be controlled by the select inputs. If all output clocks are not required, Bank B can be three-stated. The select inputs also allow the input clock to be directly applied to the outputs for chip and system testing purposes.
The CY2305/CY2309 PLLs enter a power-down mode when there are no rising edges on the REF input. In this state, the outputs are three-stated and the PLL is turned off, resulting in less than 25.0 μA current draw for these parts. The CY2309 PLLs shut down in one additional case as shown in Select Input Decoding on page 5.
Multiple CY2305 and CY2309 devices can accept the same input clock and distribute it. In this case, the skew between the outputs of two devices is guaranteed to be less than 700 ps.
Features
10 MHz to 100/133 MHz operating range, compatible with CPU and PCI bus frequencies
Zero input-output propagation delay
60-ps typical cycle-to-cycle jitter (high drive)
Multiple low skew outputs
85 ps typical output-to-output skew
One input drives five outputs (CY2305)
One input drives nine outputs, grouped as 4 4 1 (CY2309)
Compatible with Pentium-based systems
Test Mode to bypass phase-locked loop (PLL) (CY2309)
Packages:
8-pin, 150-mil SOIC package (CY2305)
16-pin 150-mil SOIC or 4.4-mm TSSOP (CY2309)
3.3 V operation
Commercial and industrial temperature ranges
Applications
Clock distribution in high-speed systems
PCI bus clock distribution
CPU clock distribution
Test and measurement equipment
Data acquisition systems
Telecommunications systems
The CY2305/CY2309 is a low-cost 3.3 V zero delay buffer designed to distribute high speed clocks. It accepts one reference input, and drives out multiple low skew clocks. The CY2305 has five outputs, while the CY2309 has nine outputs, grouped as 4 4 1. Both devices have on-chip PLLs which lock to an input clock on the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad.
The CY2309 has two banks of four outputs each, which can be controlled by the select inputs. If all output clocks are not required, Bank B can be three-stated. The select inputs also allow the input clock to be directly applied to the outputs for chip and system testing purposes.
The CY2305/CY2309 PLLs enter a power-down mode when there are no rising edges on the REF input. In this state, the outputs are three-stated and the PLL is turned off, resulting in less than 25.0 μA current draw for these parts. The CY2309 PLLs shut down in one additional case as shown in Select Input Decoding on page 5.
Multiple CY2305 and CY2309 devices can accept the same input clock and distribute it. In this case, the skew between the outputs of two devices is guaranteed to be less than 700 ps.
Features
10 MHz to 100/133 MHz operating range, compatible with CPU and PCI bus frequencies
Zero input-output propagation delay
60-ps typical cycle-to-cycle jitter (high drive)
Multiple low skew outputs
85 ps typical output-to-output skew
One input drives five outputs (CY2305)
One input drives nine outputs, grouped as 4 4 1 (CY2309)
Compatible with Pentium-based systems
Test Mode to bypass phase-locked loop (PLL) (CY2309)
Packages:
8-pin, 150-mil SOIC package (CY2305)
16-pin 150-mil SOIC or 4.4-mm TSSOP (CY2309)
3.3 V operation
Commercial and industrial temperature ranges
Applications
Clock distribution in high-speed systems
PCI bus clock distribution
CPU clock distribution
Test and measurement equipment
Data acquisition systems
Telecommunications systems
Cypress Semiconductor Corp CY2305SXI-1HT technical specifications, attributes, parameters and parts with similar specifications to Cypress Semiconductor Corp CY2305SXI-1HT.
- Factory Lead Time5 Weeks
- Contact PlatingGold, Tin
- Mounting TypeSurface Mount
- Package / Case8-SOIC (0.154, 3.90mm Width)
- Surface MountYES
- Number of Pins8
- Operating Temperature-40°C~85°C
- PackagingTape & Reel (TR)
- Published2002
- JESD-609 Codee3
- Pbfree Codeyes
- Part StatusActive
- Moisture Sensitivity Level (MSL)3 (168 Hours)
- Number of Terminations8
- ECCN CodeEAR99
- Terminal FinishMatte Tin (Sn)
- TechnologyCMOS
- Voltage - Supply3V~3.6V
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)260
- Number of Functions1
- Supply Voltage3.3V
- Frequency133.33MHz
- Reflow Temperature-Max (s)30
- Base Part NumberCY2305
- Pin Count8
- Number of Outputs5
- Operating Supply Voltage3.3V
- Supply Voltage-Max (Vsup)3.6V
- Supply Voltage-Min (Vsup)3V
- Number of Circuits1
- Nominal Supply Current35mA
- Output Characteristics3-STATE
- InputClock
- Ratio - Input:Output1:5
- PLLYes
- Differential - Input:OutputNo/No
- Radiation HardeningNo
- REACH SVHCNo SVHC
- RoHS StatusROHS3 Compliant
- Lead FreeLead Free
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
27 November 2023
BT151 SCR Features, Pin Configuration, Working Principle and Applications
Ⅰ. What is a one-way thyristor?Ⅱ. Overview of BT151Ⅲ. What are the features of BT151?Ⅳ. Footprint and pin configuration of BT151Ⅴ. Technical parameters of BT151Ⅵ. How to measure... -
28 November 2023
An Introduction to LM393 Low Power Dual Voltage Comparator
Ⅰ. What is LM393 comparator?Ⅱ. What are the features of LM393 comparator?Ⅲ. Pin configuration of LM393 comparatorⅣ. Functions of LM393 comparatorⅤ. Technical parameters of LM393 comparatorⅥ. Typical circuit... -
28 November 2023
Get to Know the TL494 Pulse-Width-Modulation Control Circuits
Ⅰ. Overview of TL494Ⅱ. What are the features of TL494?Ⅲ. TL494 symbol, footprint and pin configurationⅣ. Internal structure and working parts of TL494Ⅴ. How does the TL494 work?Ⅵ.... -
29 November 2023
TDA7293 Audio Power Amplifier: Symbol, Features, Applications and TDA7293 vs TDA8954
Ⅰ. Overview of TDA7293Ⅱ. Symbol, footprint and pin configuration of TDA7293Ⅲ. Features of TDA7293Ⅳ. Technical parameters of TDA7293Ⅴ. What are the applications of TDA7293?Ⅵ. What is the difference...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.