Texas Instruments CD74ACT112M96

CD74ACT112M96 Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. There is an embedded version in the package Cut Tape (CT). T flip flop is configured with an output of Differential. It is configured with a trigger that uses Negative Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. -55°C~125°C TAis the operating temperature. There is JK Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74ACT series. You should not exceed 100MHzin its output frequency. Currently, there are 16 terminations. The 74ACT112family includes it. A voltage of 5V is used as the power supply for this D latch. A 10pFfarad input capacitance is provided by this T flip flop. ACTis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device has the clock edge trigger type of Negative Edge. This RS flip flops is a part number FF/Latches. In order to achieve its superior flexibility, 2 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TR. The D latch operates on 5V volts. In order to achieve high efficiency, the supply voltage should be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 24mA. It consumes a total of 4μA quiescent current at any given time.

CD74ACT112M96 Features
Cut Tape (CT) package
74ACT series
16 pins
5V power supplies

CD74ACT112M96 Applications
There are a lot of Texas Instruments CD74ACT112M96 Flip Flops applications.

Latch-up performance
High Performance Logic for test systems
Supports Live Insertion
Single Up Count-Control Line
Patented noise
ATE
CMOS Process
Pattern generators
Registers
Counters