ADP2504ACPZ-2.8-R7

Analog Devices Inc. ADP2504ACPZ-2.8-R7

Part Number:
ADP2504ACPZ-2.8-R7
Manufacturer:
Analog Devices Inc.
Ventron No:
3296354-ADP2504ACPZ-2.8-R7
Description:
IC REG BCK BST 2.8V 1.3A 10LFCSP
ECAD Model:
Datasheet:
ADP2504ACPZ-2.8-R7

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Analog Devices Inc. ADP2504ACPZ-2.8-R7 technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. ADP2504ACPZ-2.8-R7.
  • Contact Plating
    Tin
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    10-VFDFN Exposed Pad, CSP
  • Number of Pins
    10
  • Operating Temperature
    -40°C~125°C TA
  • Packaging
    Tape & Reel (TR)
  • JESD-609 Code
    e3
  • Pbfree Code
    no
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    3 (168 Hours)
  • Number of Terminations
    10
  • ECCN Code
    EAR99
  • Subcategory
    Switching Regulator or Controllers
  • Terminal Position
    DUAL
  • Terminal Form
    NO LEAD
  • Peak Reflow Temperature (Cel)
    260
  • Terminal Pitch
    0.5mm
  • Reflow Temperature-Max (s)
    30
  • Base Part Number
    ADP2504
  • Function
    Step-Up/Step-Down
  • Number of Outputs
    1
  • Qualification Status
    Not Qualified
  • Output Voltage
    2.8V
  • Output Type
    Fixed
  • Max Output Current
    1A
  • Operating Supply Voltage
    5.5V
  • Voltage - Input (Min)
    2.3V
  • Input Voltage-Nom
    3.6V
  • Analog IC - Other Type
    SWITCHING REGULATOR
  • Operating Supply Current
    50μA
  • Nominal Supply Current
    50μA
  • Output Configuration
    Positive
  • Max Output Voltage
    5.5V
  • Topology
    Buck-Boost
  • Control Mode
    CURRENT-MODE
  • Frequency - Switching
    2.5MHz
  • Control Technique
    PULSE WIDTH MODULATION
  • Synchronous Rectifier
    Yes
  • Min Output Voltage
    2.8V
  • Height Seated (Max)
    0.85mm
  • Length
    3mm
  • Width
    3mm
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Contains Lead
Description
ADP2504ACPZ-2.8-R7 Overview
Analog Devices Inc. is a well-known brand in the electronic components industry, and one of their popular products is the PMIC - Voltage Regulators - DC DC Switching Regulators chip. This chip falls under the category of PMIC - Voltage Regulators - DC DC Switching Regulators, which is a crucial component in regulating voltage for electronic devices. One of the key parameters of this chip is its operating temperature, which ranges from -40°C to 125°C TA. This wide temperature range allows the chip to function efficiently in various environments, making it a versatile choice for different applications. Another important parameter for this chip is its JESD-609 code, which is e3. This code indicates that the chip has been tested and meets the Joint Electron Device Engineering Council (JEDEC) standards for reliability and quality. Additionally, the ECCN code for this chip is EAR99, which means it does not fall under any specific export control classification and can be exported freely without a license. In terms of physical specifications, the terminal position for this chip is DUAL, meaning it has two terminals for connection. The peak reflow temperature for this chip is 260°C, indicating its ability to withstand high temperatures during the manufacturing process. The chip has an output voltage of 2.8V, making it suitable for a wide range of electronic devices. It also has a maximum output current of 1A, which is a measure of its power output. One of the notable features of this chip is its synchronous rectifier, which allows for more efficient power conversion. This means that the chip can regulate voltage more accurately and with less energy loss, making it an energy-efficient choice for electronic devices. Additionally, the chip has a width of 3mm, making it compact and suitable for use in small electronic devices. Lastly, it is worth mentioning that this chip is ROHS3 compliant, which means it meets the Restriction of Hazardous Substances directive set by the European Union. This directive restricts the use of certain hazardous substances in electronic and electrical equipment, making this chip a safer and more environmentally friendly option. In conclusion, the Analog Devices Inc. PMIC - Voltage Regulators - DC DC Switching Regulators chip is a high-quality and versatile component with excellent parameters that make it a popular choice among electronic manufacturers.

ADP2504ACPZ-2.8-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 5.5V

ADP2504ACPZ-2.8-R7 Applications
There are a lot of Analog Devices Inc. ADP2504ACPZ-2.8-R7 Voltage Regulators applications.

Access control systems
Milling machines
Packaging
Alternators
Computer application technology
Arc suppression circuits
Electrical power transmission
Television equipment
CNC system
Remotely powered electric motors
ADP2504ACPZ-2.8-R7 More Descriptions
Conv DC-DC Single Non-Inv/Inv/Step Up/Step Down 2.3V to 5V 10-Pin LFCSP EP T/R
Switching Regulator, Current-mode, 2A, 2900kHz Switching Freq-Max, PDSO10
The ADP2503/ADP2504 are high efficiency, low quiescent current step-up/step-down dc-to-dc converters that can operate at input voltages greater than, less than, or equal to the regulated output voltage. The power switches and synchronous rectifiers are internal to minimize external part count. At high load currents, the ADP2503/ADP2504 use a current-mode, fixed frequency pulse-width modulation (PWM) control scheme for optimal stability and transient response. To ensure the longest battery life in portable applications, the ADP2503/ADP2504 have an optional power save mode that reduces the switching frequency under light load conditions. For wireless and other low noise applications where variable frequency power save mode may cause interference, the logic control input sync forces fixed frequency PWM operation under all load conditions. The ADP2503/ADP2504 can run from input voltages between 2.3 V and 5.5 V, allowing single lithium or lithium polymer cell, multiple alkaline or NiMH cells, PCMCIA, USB, and other standard power sources. The ADP2503/ADP2504 have fixed output options, or using the adjustable model, the output voltage can be programmed through an external resistor divider. Compensation is internal to minimize the number of external components. During logic-controlled shutdown, the input is disconnected from the output and draws less than 1 μA from the input source. Operating as boost converters, the ADP2503/ADP2504 feature a true load disconnect function that isolates the load from the power source. Other key features include undervoltage lockout to prevent deep battery discharge, and soft start to prevent input current overshoot at startup. Applications Wireless handsets Digital cameras/portable audio players Miniature hard disk power supplies USB powered devices Data Sheet, Rev. A, 08/09
Product Comparison
The three parts on the right have similar specifications to ADP2504ACPZ-2.8-R7.
  • Image
    Part Number
    Manufacturer
    Contact Plating
    Mount
    Mounting Type
    Package / Case
    Number of Pins
    Operating Temperature
    Packaging
    JESD-609 Code
    Pbfree Code
    Part Status
    Moisture Sensitivity Level (MSL)
    Number of Terminations
    ECCN Code
    Subcategory
    Terminal Position
    Terminal Form
    Peak Reflow Temperature (Cel)
    Terminal Pitch
    Reflow Temperature-Max (s)
    Base Part Number
    Function
    Number of Outputs
    Qualification Status
    Output Voltage
    Output Type
    Max Output Current
    Operating Supply Voltage
    Voltage - Input (Min)
    Input Voltage-Nom
    Analog IC - Other Type
    Operating Supply Current
    Nominal Supply Current
    Output Configuration
    Max Output Voltage
    Topology
    Control Mode
    Frequency - Switching
    Control Technique
    Synchronous Rectifier
    Min Output Voltage
    Height Seated (Max)
    Length
    Width
    RoHS Status
    Lead Free
    Terminal Finish
    Max Operating Temperature
    Min Operating Temperature
    Additional Feature
    Number of Functions
    Reach Compliance Code
    Pin Count
    Efficiency
    Temperature Grade
    Output Current
    Min Input Voltage
    Max Input Voltage
    Switcher Configuration
    Switching Frequency
    Height
    Surface Mount
    Time@Peak Reflow Temperature-Max (s)
    JESD-30 Code
    Voltage - Input (Max)
    Current - Output
    Voltage - Output (Min/Fixed)
    Weight
    View Compare
  • ADP2504ACPZ-2.8-R7
    ADP2504ACPZ-2.8-R7
    Tin
    Surface Mount
    Surface Mount
    10-VFDFN Exposed Pad, CSP
    10
    -40°C~125°C TA
    Tape & Reel (TR)
    e3
    no
    Obsolete
    3 (168 Hours)
    10
    EAR99
    Switching Regulator or Controllers
    DUAL
    NO LEAD
    260
    0.5mm
    30
    ADP2504
    Step-Up/Step-Down
    1
    Not Qualified
    2.8V
    Fixed
    1A
    5.5V
    2.3V
    3.6V
    SWITCHING REGULATOR
    50μA
    50μA
    Positive
    5.5V
    Buck-Boost
    CURRENT-MODE
    2.5MHz
    PULSE WIDTH MODULATION
    Yes
    2.8V
    0.85mm
    3mm
    3mm
    ROHS3 Compliant
    Contains Lead
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
  • ADP2106ACPZ-1.5-R7
    -
    Surface Mount
    Surface Mount
    16-VQFN Exposed Pad, CSP
    16
    -
    Cut Tape (CT)
    e3
    yes
    Obsolete
    3 (168 Hours)
    16
    EAR99
    Switching Regulator or Controllers
    QUAD
    NO LEAD
    260
    0.65mm
    40
    ADP2106
    -
    1
    Not Qualified
    1.5V
    Fixed
    1.5A
    -
    -
    3.6V
    SWITCHING REGULATOR
    -
    30μA
    Positive
    -
    -
    CURRENT-MODE
    -
    PULSE WIDTH MODULATION
    Yes
    1.5V
    -
    4mm
    -
    ROHS3 Compliant
    Contains Lead
    Matte Tin (Sn)
    125°C
    -40°C
    ALSO OPERATES IN PULSE FREQUENCY MODULATION CONTROL SCHEME
    1
    unknown
    16
    97 %
    AUTOMOTIVE
    1.5A
    2.7V
    5.5V
    BUCK
    1.2MHz
    1mm
    -
    -
    -
    -
    -
    -
    -
  • ADP2109ACBZ-1.8-R7
    -
    -
    Surface Mount
    5-WFBGA, WLCSP
    -
    -40°C~85°C TA
    Tape & Reel (TR)
    e3
    yes
    Obsolete
    1 (Unlimited)
    5
    -
    -
    BOTTOM
    BALL
    225
    0.5mm
    -
    -
    Step-Down
    1
    -
    1.8V
    Fixed
    -
    -
    2.3V
    3.6V
    SWITCHING REGULATOR
    -
    -
    Positive
    -
    Buck
    CURRENT-MODE
    3MHz
    PULSE WIDTH MODULATION
    Yes
    -
    0.657mm
    -
    -
    ROHS3 Compliant
    -
    MATTE TIN
    -
    -
    -
    -
    unknown
    -
    -
    -
    -
    -
    -
    -
    -
    -
    YES
    NOT SPECIFIED
    R-PBGA-B5
    5.5V
    600mA
    1.8V
    -
  • ADP2108ACBZ-1.3-R7
    Copper, Silver, Tin
    Surface Mount
    Surface Mount
    5-WFBGA, WLCSP
    5
    -40°C~125°C TA
    Tape & Reel (TR)
    e3
    no
    Obsolete
    3 (168 Hours)
    5
    EAR99
    Switching Regulator or Controllers
    BOTTOM
    BALL
    225
    -
    NOT SPECIFIED
    ADP2108
    Step-Down
    1
    Not Qualified
    1.3V
    Fixed
    600mA
    -
    2.3V
    3.6V
    SWITCHING REGULATOR
    30μA
    30μA
    Positive
    -
    Buck
    CURRENT-MODE
    3MHz
    PULSE WIDTH MODULATION
    Yes
    1.3V
    -
    -
    -
    ROHS3 Compliant
    Contains Lead
    MATTE TIN
    -
    -
    -
    -
    -
    -
    95 %
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    5.5V
    -
    -
    42.013993mg
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.