Analog Devices Inc. ADP198ACPZ-R7

Name: ADP198ACPZ-R7
Brand: Analog Devices Inc.
SKU: 3742335-ADP198ACPZ-R7
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: ADP198ACPZ-R7

Manufacturer:: Analog Devices Inc.

Ventron No:: 3742335-ADP198ACPZ-R7

Description:: IC LOAD SW H-SIDE W/RCB 8LFCSP

ECAD Model:

Datasheet:: ADP198ACPZ-R7

Specifications

Analog Devices Inc. ADP198ACPZ-R7 technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. ADP198ACPZ-R7.

Factory Lead Time
8 Weeks
Lifecycle Status
PRODUCTION (Last Updated: 1 week ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-UFDFN Exposed Pad, CSP
Number of Pins
8
Operating Temperature
-40°C~125°C TJ
Packaging
Tape & Reel (TR)
Feature
Slew Rate Controlled
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Resistance
40mOhm
Subcategory
Peripheral Drivers
Technology
DMOS
Terminal Position
DUAL
Terminal Form
NO LEAD
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
1
Supply Voltage
2.8V
Terminal Pitch
0.5mm
Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
ADP198
Pin Count
8
Number of Outputs
1
Qualification Status
Not Qualified
Output Type
P-Channel
Max Output Current
1A
Operating Supply Voltage
6.5V
Interface
On/Off
Operating Supply Current
1.1μA
Output Configuration
High Side
Output Current
200mA
Voltage - Supply (Vcc/Vdd)
Not Required
Input Type
Non-Inverting
Turn On Delay Time
450 μs
Switch Type
General Purpose
Min Input Voltage
1.65V
Max Input Voltage
6.5V
Output Current per Channel
1A
Nominal Input Voltage
6.5V
Ratio - Input:Output
1:1
Voltage - Load
1.65V~6.5V
Driver Number of Bits
1
Fault Protection
Reverse Current
Rds On (Typ)
75m Ω
Height Seated (Max)
0.65mm
Length
2mm
Width
2mm
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead

Description

ADP198ACPZ-R7 Overview
Tape & Reel (TR) is how it's packaged.It is included with the 8-UFDFN Exposed Pad, CSP package as well.This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.A maximum output voltage of P-Channel volts has been specified.As far as features are concerned, the LED driving board has Slew Rate Controlled.It is part of the ADP198 family of LED drivers.In total, there are 8 terminations.In order to operate, the 8 pins are used.It consists of 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.With a supply voltage of 2.8V, high efficiency is possible.Surface Mount is mounted in the way.8 pins are equipped with it.It has 40mOhm resistance.This case has the output current set to 200mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.A supply voltage of 6.5V is recommended for maximum efficiency.A maximum input voltage of 6.5V volts can be applied to it.Input voltage must be at least 1.65V volts.

ADP198ACPZ-R7 Features
Supplied from 2.8V
Resistance of 40mOhm

ADP198ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP198ACPZ-R7 Power Switches ICs applications.

Mobile Communication Devices
Hot Swaps
Hot Swap
PDAs
Hot Swap
Handheld Devices
Notebook and Tablet Computers
HDD and SSD
Notebook PC
Wearable Devices

ADP198ACPZ-R7 More Descriptions

Logic-Controlled, 1 A, High-Side Load Switch with Reverse Current Blocking
In a Pack of 5, Analog Devices ADP198ACPZ-R7, 1 Power Switch IC, High Side Switch 8-Pin, LFCSP
Power Switch ICs - Power Distribution Logic-Cntrld 1A Hi-Side Load Switch
Power Switch Hi Side 1-OUT 1A 0.2Ohm 8-Pin LFCSP EP T/R
Buffer/Inverter Based Peripheral Driver, 1 Driver, DMOS, PDSO8
1.65V~6.5V 75mΩ 1A LFCSP-8 Power Distribution Switches ROHS
Power Supply Support Circuit, Fixed, 1 Channel, PMOS, PDSO8
POWER LOAD SWITCH, 6.5V, LFCSP-EP-8;
IC LOAD SW H-SIDE W/RCB 8LFCSP
POWER LOAD SWITCH, HIGH SIDE, LFCSP-8; Power Load Switch Type: High Side; Input Voltage: 6.5V; Current Limit: 1A; On State Resistance: 0.075ohm; Distribution Switch Case Style: LFCSP; No. of Pins: 8Pins; Thermal Protection: No; On / Enable Input Polarity: Active High; No. of Outputs: 1Outputs; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: ADP198 Series; Automotive Qualification Standard: -; RoHS Phthalates Compliant: Yes; MSL: MSL 1 - Unlimited; SVHC: No SVHC (07-Jul-2017)

Certification