Analog Devices Inc. ADG439FBR
- Part Number:
- ADG439FBR
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3672223-ADG439FBR
- Description:
- IC MULTIPLEXER DUAL 4X1 16SOIC
- Datasheet:
- ADG439FBR
Analog Devices Inc. ADG439FBR technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. ADG439FBR.
- Mounting TypeSurface Mount
- Package / Case16-SOIC (0.154, 3.90mm Width)
- Surface MountYES
- Number of Pins16
- Operating Temperature-40°C~125°C TA
- PackagingTube
- JESD-609 Codee0
- Pbfree Codeno
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations16
- ECCN CodeEAR99
- Resistance270Ohm
- Additional FeatureFAULT PROTECTED; OVERVOLTAGE PROTECTION
- SubcategoryMultiplexer or Switches
- Max Power Dissipation2.6mW
- TechnologyCMOS
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)240
- Number of Functions1
- Supply Voltage15V
- Reach Compliance Codenot_compliant
- Reflow Temperature-Max (s)NOT SPECIFIED
- Base Part NumberADG439
- Pin Count16
- Qualification StatusNot Qualified
- Number of Channels4
- InterfaceParallel
- Number of Circuits2
- Max Supply Voltage25V
- Min Supply Voltage15V
- Analog IC - Other TypeDIFFERENTIAL MULTIPLEXER
- Power Dissipation2.6mW
- Max Supply Current200μA
- Throw Configuration4PST
- Turn On Delay Time250 ns
- Number of Inputs8
- Neg Supply Voltage-Nom (Vsup)-15V
- Turn-Off Delay Time150 ns
- Max Dual Supply Voltage22V
- On-State Resistance (Max)270Ohm Typ
- Multiplexer/Demultiplexer Circuit4:1
- Off-state Isolation-Nom93 dB
- Current - Leakage (IS(off)) (Max)500pA
- Channel Capacitance (CS(off), CD(off))3pF 22pF
- On-state Resistance Match-Nom8.1Ohm
- Switch CircuitSP4T
- Switch Time (Ton, Toff) (Max)230ns, 130ns
- Charge Injection15pC
- Channel-to-Channel Matching (ΔRon)8.1 Ω
- Crosstalk-93dB @ 100kHz
- SwitchingBREAK-BEFORE-MAKE
- Switch-off Time-Max173ns
- Voltage - Supply, Dual (V±)±15V
- Height Seated (Max)1.75mm
- Length9.9mm
- Width3.9mm
- RoHS StatusNon-RoHS Compliant
- Lead FreeContains Lead
ADG439FBR Overview
The Analog Devices Inc. brand offers a versatile chip designed for Interface - Analog Switches, Multiplexers, Demultiplexers. This particular chip, packaged in a tube and with a Moisture Sensitivity Level (MSL) of 1 (Unlimited), falls under the Interface - Analog Switches, Multiplexers, Demultiplexers category. It boasts a variety of parameters, including 16 terminations, FAULT PROTECTED and OVERVOLTAGE PROTECTION as additional features, a supply voltage of 15V (with a maximum of 25V), and 8 inputs. With a maximum on-state resistance of 270Ohm and a channel-to-channel matching of 8.1 Ω, this chip offers reliable and efficient performance with BREAK-BEFORE-MAKE switching.
ADG439FBR Features
4 Channels
Switch Circuit: SP4T
Additional Features: FAULT PROTECTED; OVERVOLTAGE PROTECTION
ADG439FBR Applications
There are a lot of Analog Devices Inc. ADG439FBR Analog Switches & Multiplexers ICs applications.
Switching Systems
ISDN NT1/TA
Wireless Local Loop
Fiber to the Home
Cell phones
Avionics and Military Systems
Microwave transmission systems
Automotive applications
Audio signal routing
Signal routing between systems
The Analog Devices Inc. brand offers a versatile chip designed for Interface - Analog Switches, Multiplexers, Demultiplexers. This particular chip, packaged in a tube and with a Moisture Sensitivity Level (MSL) of 1 (Unlimited), falls under the Interface - Analog Switches, Multiplexers, Demultiplexers category. It boasts a variety of parameters, including 16 terminations, FAULT PROTECTED and OVERVOLTAGE PROTECTION as additional features, a supply voltage of 15V (with a maximum of 25V), and 8 inputs. With a maximum on-state resistance of 270Ohm and a channel-to-channel matching of 8.1 Ω, this chip offers reliable and efficient performance with BREAK-BEFORE-MAKE switching.
ADG439FBR Features
4 Channels
Switch Circuit: SP4T
Additional Features: FAULT PROTECTED; OVERVOLTAGE PROTECTION
ADG439FBR Applications
There are a lot of Analog Devices Inc. ADG439FBR Analog Switches & Multiplexers ICs applications.
Switching Systems
ISDN NT1/TA
Wireless Local Loop
Fiber to the Home
Cell phones
Avionics and Military Systems
Microwave transmission systems
Automotive applications
Audio signal routing
Signal routing between systems
ADG439FBR More Descriptions
Analog Multiplexer Dual 4:1 16-Pin SOIC N Tube
Differential Multiplexer, 1 Func, 4 Channel, CMOS, PDSO16
Multiplexer Switch ICs High Perf 4:1 Fault-Protected
IC MULTIPLEXER DUAL 4X1 16SOIC
DSP Fixed-Point 32bit 600MHz 4800MIPS 532-Pin FC/CSP
IC SWITCH SP4T X 2 270OHM 16SOIC
The ADG438F and ADG439F are CMOS analog multiplexers, with the ADG438F comprising eight single channels and the ADG439F comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, and n-channel MOSFET structure, both device and signal source protection is provided in the event of an overvoltage or power loss. The multiplexer can withstand continuous overvoltage inputs from -40 V to 55 V. During fault conditions with power supplies off, the multiplexer input (or output) appears as an open circuit and only a few nanoamperes of leakage current flows. This protects not only the multiplexer and the circuitry driven by the multiplexer, but also protects the sensors or signal sources which drive the multiplexer. The ADG438F switches one of eight inputs to a common output as determined by the 3-bit binary address lines, A0, A1, and A2. The ADG439F switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines, A0 and A1. An EN input on each device is used to enable or disable the device. When disabled, all channels are switched off. Product Highlights Fault Protection. The ADG438F and ADG439F can with-stand continuous voltage inputs up to -40 V or 55 V. When a fault occurs due to the power supplies being turned off, all the channels are turned off and only a leakage current of a few nanoamperes flows. On channel saturates while fault exists. Low RON. Fast Switching Times. Break-Before-Make Switching. Switches are guaranteed break-before-make so that input signals are protected against momentary shorting. Trench Isolation Eliminates Latch-Up. A dielectric trench separates the p-channel and n-channel MOSFETs thereby preventing latch-up. Improved Off Isolation. Trench isolation enhances the channel-to-channel isolation of the ADG438F/ADG439F. Applications Data acquisition systems Industrial and process control systems Avionics test equipment Signal routing between systems High reliability control systems
Differential Multiplexer, 1 Func, 4 Channel, CMOS, PDSO16
Multiplexer Switch ICs High Perf 4:1 Fault-Protected
IC MULTIPLEXER DUAL 4X1 16SOIC
DSP Fixed-Point 32bit 600MHz 4800MIPS 532-Pin FC/CSP
IC SWITCH SP4T X 2 270OHM 16SOIC
The ADG438F and ADG439F are CMOS analog multiplexers, with the ADG438F comprising eight single channels and the ADG439F comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, and n-channel MOSFET structure, both device and signal source protection is provided in the event of an overvoltage or power loss. The multiplexer can withstand continuous overvoltage inputs from -40 V to 55 V. During fault conditions with power supplies off, the multiplexer input (or output) appears as an open circuit and only a few nanoamperes of leakage current flows. This protects not only the multiplexer and the circuitry driven by the multiplexer, but also protects the sensors or signal sources which drive the multiplexer. The ADG438F switches one of eight inputs to a common output as determined by the 3-bit binary address lines, A0, A1, and A2. The ADG439F switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines, A0 and A1. An EN input on each device is used to enable or disable the device. When disabled, all channels are switched off. Product Highlights Fault Protection. The ADG438F and ADG439F can with-stand continuous voltage inputs up to -40 V or 55 V. When a fault occurs due to the power supplies being turned off, all the channels are turned off and only a leakage current of a few nanoamperes flows. On channel saturates while fault exists. Low RON. Fast Switching Times. Break-Before-Make Switching. Switches are guaranteed break-before-make so that input signals are protected against momentary shorting. Trench Isolation Eliminates Latch-Up. A dielectric trench separates the p-channel and n-channel MOSFETs thereby preventing latch-up. Improved Off Isolation. Trench isolation enhances the channel-to-channel isolation of the ADG438F/ADG439F. Applications Data acquisition systems Industrial and process control systems Avionics test equipment Signal routing between systems High reliability control systems
The three parts on the right have similar specifications to ADG439FBR.
-
ImagePart NumberManufacturerMounting TypePackage / CaseSurface MountNumber of PinsOperating TemperaturePackagingJESD-609 CodePbfree CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsECCN CodeResistanceAdditional FeatureSubcategoryMax Power DissipationTechnologyTerminal PositionTerminal FormPeak Reflow Temperature (Cel)Number of FunctionsSupply VoltageReach Compliance CodeReflow Temperature-Max (s)Base Part NumberPin CountQualification StatusNumber of ChannelsInterfaceNumber of CircuitsMax Supply VoltageMin Supply VoltageAnalog IC - Other TypePower DissipationMax Supply CurrentThrow ConfigurationTurn On Delay TimeNumber of InputsNeg Supply Voltage-Nom (Vsup)Turn-Off Delay TimeMax Dual Supply VoltageOn-State Resistance (Max)Multiplexer/Demultiplexer CircuitOff-state Isolation-NomCurrent - Leakage (IS(off)) (Max)Channel Capacitance (CS(off), CD(off))On-state Resistance Match-NomSwitch CircuitSwitch Time (Ton, Toff) (Max)Charge InjectionChannel-to-Channel Matching (ΔRon)CrosstalkSwitchingSwitch-off Time-MaxVoltage - Supply, Dual (V±)Height Seated (Max)LengthWidthRoHS StatusLead FreeFactory Lead TimeLifecycle StatusContact PlatingTerminal PitchOperating Supply VoltagePolarityOperating Supply CurrentSupply TypeMin Dual Supply VoltageHigh Level Output CurrentDual Supply VoltageNormal PositionRadiation HardeningTerminal FinishPropagation DelayLogic FunctionView Compare
-
ADG439FBRSurface Mount16-SOIC (0.154, 3.90mm Width)YES16-40°C~125°C TATubee0noObsolete1 (Unlimited)16EAR99270OhmFAULT PROTECTED; OVERVOLTAGE PROTECTIONMultiplexer or Switches2.6mWCMOSDUALGULL WING240115Vnot_compliantNOT SPECIFIEDADG43916Not Qualified4Parallel225V15VDIFFERENTIAL MULTIPLEXER2.6mW200μA4PST250 ns8-15V150 ns22V270Ohm Typ4:193 dB500pA3pF 22pF8.1OhmSP4T230ns, 130ns15pC8.1 Ω-93dB @ 100kHzBREAK-BEFORE-MAKE173ns±15V1.75mm9.9mm3.9mmNon-RoHS CompliantContains Lead-----------------
-
Surface Mount16-SOIC (0.154, 3.90mm Width)YES16-40°C~85°C TATape & Reel (TR)e3noActive1 (Unlimited)16EAR9935OhmALSO OPERATE WITH 12V SINGLE SUPPLYMultiplexer or Switches35μWCMOS-GULL WING260415V-30ADG41116-4Parallel-25V5V-35μW1μASPST175 ns--15V145 ns22V35Ohm1:168 dB250pA9pF 9pF-SPST - NC175ns, 145ns5pC--85dB @ 1MHzBREAK-BEFORE-MAKE-±15V1.75mm9.9mm3.9mmROHS3 CompliantContains Lead8 WeeksPRODUCTION (Last Updated: 2 weeks ago)Tin1.27mm12VNon-Inverting100pADual, Single13.5V30mA15VNCNo---
-
Surface Mount16-TSSOP (0.173, 4.40mm Width)YES16-40°C~85°C TATape & Reel (TR)e3noActive1 (Unlimited)16EAR9935OhmALSO OPERATE WITH 12V SINGLE SUPPLYMultiplexer or Switches35μWCMOS-GULL WING260415V-30ADG41316Not Qualified4Parallel-25V5V-35μW1μASPST175 ns--15V145 ns22V35Ohm1:168 dB250pA9pF 9pF-SPST - NO/NC175ns, 145ns5pC--85dB @ 1MHzBREAK-BEFORE-MAKE-±15V1.2mm5mm-ROHS3 CompliantContains Lead10 WeeksPRODUCTION (Last Updated: 4 weeks ago)-0.65mm12V-100pADual, Single13.5V-15V--Matte Tin (Sn)--
-
Surface Mount16-SOIC (0.154, 3.90mm Width)YES16-40°C~85°C TATape & Reel (TR)e0noObsolete1 (Unlimited)16EAR99100Ohm--600mWCMOS-GULL WING240115Vnot_compliant30ADG40916Not Qualified4-232V--3.1mW-4PST150 ns8-15V60 ns22V100Ohm4:175 dB500pA11pF 20pF15OhmSP4T-20pC15 Ω (Max)-85dB @ 100kHzBREAK-BEFORE-MAKE-±15V1.75mm9.9mm3.9mmNon-RoHS CompliantContains Lead----12V-100μADual, Single--15V---130 nsMultiplexer
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
18 December 2023
LT4320 Ideal Diode Bridge Controllers Subverts the Traditional Bridge Rectifier
Ⅰ. What is LT4320?Ⅱ. How does LT4320 overcome the shortcomings of full-wave rectification?Ⅲ. Which manufacturer makes the LT4320?Ⅳ. Pin configuration of LT4320Ⅴ. Three-phase ideal rectification based on LT4320Ⅵ.... -
18 December 2023
Can CR2032 Button Battery Be Recharged?
Ⅰ. What is CR2032 battery?Ⅱ. Development of CR2032 lithium button batteryⅢ. Five major brands of CR2032 button batteriesⅣ. Applications and application circuit of CR2032 button batteryⅤ. Is the... -
19 December 2023
DS1990A: An Authentication and Data Storage Solution that Balances Efficiency and Security
Ⅰ. What is iButton?Ⅱ. Overview of DS1990A iButtonⅢ. Functional block diagram of DS1990AⅣ. Where is DS1990A iButton used?Ⅴ. How does DS1990A communicate with the host device?Ⅵ. Specifications of... -
19 December 2023
PT2399: The Next-Gen Digital Delay and Echo Audio Processor IC
Ⅰ. What is PT2399?Ⅱ. Structure and working principle of PT2399Ⅲ. Total harmonic distortion and noise of PT2399Ⅳ. Which one is better, PT2399 or PT2399?Ⅴ. Who is the manufacturer...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.