Analog Devices Inc. ADG3304BRUZ-REEL7
- Part Number:
- ADG3304BRUZ-REEL7
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3225534-ADG3304BRUZ-REEL7
- Description:
- IC XLATR BIDIR V-LVL 4CH 14TSSOP
- Datasheet:
- ADG3304BRUZ-REEL7
Analog Devices Inc. ADG3304BRUZ-REEL7 technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. ADG3304BRUZ-REEL7.
- Factory Lead Time8 Weeks
- Lifecycle StatusPRODUCTION (Last Updated: 1 week ago)
- Contact PlatingTin
- Mounting TypeSurface Mount
- Package / Case14-TSSOP (0.173, 4.40mm Width)
- Surface MountYES
- Number of Pins14
- Weight140.30179mg
- Operating Temperature-40°C~85°C TA
- PackagingTape & Reel (TR)
- JESD-609 Codee3
- FeatureAuto-Direction Sensing
- Pbfree Codeno
- Part StatusActive
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations14
- ECCN CodeEAR99
- SubcategoryOther Interface ICs
- TechnologyCMOS
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)260
- Number of Functions1
- Supply Voltage1.8V
- Terminal Pitch0.65mm
- Reflow Temperature-Max (s)40
- Base Part NumberADG3304
- Pin Count14
- Output TypeTri-State, Non-Inverted
- Number of Channels4
- Number of Circuits1
- Max Supply Voltage5.5V
- Min Supply Voltage1.15V
- Operating Supply Current1μA
- Propagation Delay35 ns
- Quiescent Current5μA
- Turn On Delay Time35 ns
- Logic FunctionTranslator
- Data Rate50Mbps
- Interface IC TypeINTERFACE CIRCUIT
- High Level Output Current-20μA
- Channel TypeBidirectional
- Low Level Output Current20μA
- Translator TypeVoltage Level
- Voltage - VCCA1.15V~5.5V
- Voltage - VCCB1.65V~5.5V
- Length5mm
- Radiation HardeningNo
- RoHS StatusROHS3 Compliant
- Lead FreeContains Lead
ADG3304BRUZ-REEL7 Overview
Package 14-TSSOP (0.173, 4.40mm Width) includes it.Tape & Reel (TR) is the way in which it is packaged.This output is configured with Tri-State, Non-Inverted.Its translator type is Voltage Level.The electronic part is mounted using the Surface Mount method.There is Bidirectional channel type for this electrical device.Level translators is -40°C~85°C TA at the operating temperature.In order to achieve its superior flexibility, 1 circuits are used.As part of the transmission line termination process, there are a total of 14 terminations.Parts that are related to ADG3304 can be identified based on its base part number.A supply voltage of 1.8V powers it.The device has a pin count of 14.The board has 14 pins.Level translators supports a maximum supply voltage of 5.5V.A voltage of 1.15V is the minimum supply voltage required for it to operate.1.15V~5.5V is the supply rail configuration on the VCCA.1.65V~5.5V is the configuration of the VCCB supply rail.There are a total of 4 channels.As part of Other Interface ICs, it belongs.Level translators consumes 5μA of quiescent current wLevel translatorshout being affected by external factors. In order to ensure Auto-Direction Sensing during operation, there are several things to consider.
ADG3304BRUZ-REEL7 Features
14-TSSOP (0.173, 4.40mm Width) package
1 circuits
14 pin count
14 pins
ADG3304BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG3304BRUZ-REEL7 voltage translators & level shifters applications.
Automotive
Available in Military (-55°C to 125°C)
I2C
Controlled Baseline
SDIO
I2C / SMBus
Test Site
Extended Product Life Cycle
Temperature Ranges (1)
SMBus
Package 14-TSSOP (0.173, 4.40mm Width) includes it.Tape & Reel (TR) is the way in which it is packaged.This output is configured with Tri-State, Non-Inverted.Its translator type is Voltage Level.The electronic part is mounted using the Surface Mount method.There is Bidirectional channel type for this electrical device.Level translators is -40°C~85°C TA at the operating temperature.In order to achieve its superior flexibility, 1 circuits are used.As part of the transmission line termination process, there are a total of 14 terminations.Parts that are related to ADG3304 can be identified based on its base part number.A supply voltage of 1.8V powers it.The device has a pin count of 14.The board has 14 pins.Level translators supports a maximum supply voltage of 5.5V.A voltage of 1.15V is the minimum supply voltage required for it to operate.1.15V~5.5V is the supply rail configuration on the VCCA.1.65V~5.5V is the configuration of the VCCB supply rail.There are a total of 4 channels.As part of Other Interface ICs, it belongs.Level translators consumes 5μA of quiescent current wLevel translatorshout being affected by external factors. In order to ensure Auto-Direction Sensing during operation, there are several things to consider.
ADG3304BRUZ-REEL7 Features
14-TSSOP (0.173, 4.40mm Width) package
1 circuits
14 pin count
14 pins
ADG3304BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG3304BRUZ-REEL7 voltage translators & level shifters applications.
Automotive
Available in Military (-55°C to 125°C)
I2C
Controlled Baseline
SDIO
I2C / SMBus
Test Site
Extended Product Life Cycle
Temperature Ranges (1)
SMBus
ADG3304BRUZ-REEL7 More Descriptions
1.65V~5.5V 1 4 1.15V~5.5V 50Mbps TSSOP-14 Translators / Level Shifters ROHS
Level Translator, 4I/P, 4Circuit, Tssop; No. Of Inputs:4Inputs; Output Current:-; Propagation Delay:14Ns; No. Of Pins:14Pins; Logic Case Style:Tssop; Supply Voltage Min:1.15V; Supply Voltage Max:5.5V; Operating Temperature Min:-40°C Rohs Compliant: Yes |Analog Devices ADG3304BRUZ-REEL7
The ADG3304 is a bidirectional logic level translator that contains four bidirectional channels. It can be used in multivoltage digital system applications such as data transfer between a low voltage DSP/controller and a higher voltage device using SPI and MICROWIRE interfaces. The internal architecture allows the device to perform bidirectional logic level translation without an additional signal to set the direction in which the translation takes place. The voltage applied to VCCA sets the logic levels on the A side of the device, while VCCY sets the levels on the Y side. For proper operation, VCCA must always be less than VCCY. The VCCA-compatible logic signals applied to the A side of the device appear as VCCY-compatible levels on the Y side. Similarly, VCCY-compatible logic levels applied to the Y side of the device appear as VCCA-compatible logic levels on the A side. The enable pin (EN) provides three-state operation on both the A-side and the Y-side pins. When the EN pin is pulled low, the terminals on both sides of the device are in the high impedance state. The EN pin is referred to the VCCA supply voltage and driven high for normal operation. The ADG3304 is available in compact 14-lead TSSOP and 12-bump WLCSP packages. It is guaranteed to operate over the 1.15 V to 5.5 V supply voltage range and the extended −40°C to 85°C temperature range. Supports defense and aerospace applications (AQEC standard) Applications SPI®, MICROWIRE™ Level Translation Low Voltage ASIC Level Translation Smart Card Readers Cell Phones and Cell Phone Cradles Portable Communication Devices Telecommunications Equipment Network Switches and Routers Storage Systems (SAN/NAS) Computing/Server Applications GPS Portable POS Systems Low Cost Serial Interfaces
Level Translator, 4I/P, 4Circuit, Tssop; No. Of Inputs:4Inputs; Output Current:-; Propagation Delay:14Ns; No. Of Pins:14Pins; Logic Case Style:Tssop; Supply Voltage Min:1.15V; Supply Voltage Max:5.5V; Operating Temperature Min:-40°C Rohs Compliant: Yes |Analog Devices ADG3304BRUZ-REEL7
The ADG3304 is a bidirectional logic level translator that contains four bidirectional channels. It can be used in multivoltage digital system applications such as data transfer between a low voltage DSP/controller and a higher voltage device using SPI and MICROWIRE interfaces. The internal architecture allows the device to perform bidirectional logic level translation without an additional signal to set the direction in which the translation takes place. The voltage applied to VCCA sets the logic levels on the A side of the device, while VCCY sets the levels on the Y side. For proper operation, VCCA must always be less than VCCY. The VCCA-compatible logic signals applied to the A side of the device appear as VCCY-compatible levels on the Y side. Similarly, VCCY-compatible logic levels applied to the Y side of the device appear as VCCA-compatible logic levels on the A side. The enable pin (EN) provides three-state operation on both the A-side and the Y-side pins. When the EN pin is pulled low, the terminals on both sides of the device are in the high impedance state. The EN pin is referred to the VCCA supply voltage and driven high for normal operation. The ADG3304 is available in compact 14-lead TSSOP and 12-bump WLCSP packages. It is guaranteed to operate over the 1.15 V to 5.5 V supply voltage range and the extended −40°C to 85°C temperature range. Supports defense and aerospace applications (AQEC standard) Applications SPI®, MICROWIRE™ Level Translation Low Voltage ASIC Level Translation Smart Card Readers Cell Phones and Cell Phone Cradles Portable Communication Devices Telecommunications Equipment Network Switches and Routers Storage Systems (SAN/NAS) Computing/Server Applications GPS Portable POS Systems Low Cost Serial Interfaces
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
28 August 2023
Tesla is producing Model Y for export to Canada at its Shanghai factory
According to insiders, Tesla has started producing a Model Y car in Shanghai that will be sold in Canada this year, marking the first time Tesla has shipped... -
28 August 2023
ASE investment control: 25% of system level packaging capacity will be moved out of Chinese Mainland
Investors asked whether the ASE investment control system level packaging (SiP) production line is highly concentrated in Chinese Mainland, and whether it intends to diversify the production line?... -
28 August 2023
Samsung Electronics plans to launch high-end memory chip rental service
Samsung Electronics, the world's largest memory chip manufacturer, is considering introducing high-end memory chip rental services as its new business model to ensure stable sales and revenue flow... -
28 August 2023
Galaxycre: The company has completed the research and development of 32 million pixel CMOS image sensor technology
Recently, Gekewei received a survey from the agency on "What is the future development trend of CMOS image sensor chip? Will it encounter some technical barriers? How to...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.