Analog Devices Inc. ADA4930-1YCP-EBZ

ADA4930-1YCP-EBZ"A01629"EB-D16CP33-1Z; ADA4930-1YCP-EBZ_A01629_EB-D16CP33-1Z
ADA4930-1 Differential Amplifier Bare Evaluation Board
Amplifier IC Development Tools ADA4930-1 Eval Brd
Silicon Manufacturer:Analog Devices
The ADA4930-1/ADA4930-2 are very low noise, low distortion, high speed differential amplifiers. They are an ideal choice for driving 1.8 V high performance ADCs with resolutions up to 14 bits from dc to 70 MHz. The adjustable output common mode allows the ADA4930-1/ADA4930-2 to match the input of the ADC. The internal common-mode feedback loop provides exceptional output balance, suppression of even-order harmonic distortion products, and dc level translation. With the ADA4930-1/ADA4930-2, differential gain configurations are easily realized with a simple external feedback network of four resistors determining the closed-loop gain of the amplifier. The ADA4930-1/ADA4930-2 are fabricated using Analog Devices, Inc., proprietary silicon-germanium (SiGe), complementary bipolar process, enabling them to achieve very low levels of distortion with an input voltage noise of only 1.2 nV/√Hz. The low dc offset and excellent dynamic performance of the ADA4930-1/ADA4930-2 make them well suited for a wide variety of data acquisition and signal processing applications. The ADA4930-1 is available in a Pb-free, 3 mm × 3 mm 16-lead LFCSP, and the ADA4930-2 is available in a Pb-free, 4 mm × 4 mm 24-lead LFCSP. The pinout has been optimized to facilitate printed circuit board (PCB) layout and minimize distortion. The ADA4930-1 is specified to operate over the −40°C to 105°C temperature range, and the ADA4930-2 is specified to operate over the −40°C to 105°C temperature range for 3.3 V or 5 V supply voltages. Applications ADC drivers Single-ended-to-differential converters IF and baseband gain blocks Differential buffers Line drivers