Analog Devices Inc. ADA4000-1ARZ-R7

ADA4000-1ARZ-R7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the J-FET-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. 8 pins are located on the operational amplifiers. The input offset voltage is 1.7mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 1.65mA . It is recommended to keep the voltage gain at 114dB at all times. This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125°C. The total number of elements in this buffer amplifier is 1. It is recommended that you use an 1.35mA power supply with this electrical part in order for it to operate correctly. Under 36V is the minimum supply voltage for this electric component. Over 8V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V. 1.65mA quiescent currents are flowing through buffer op amp. On the linear amplifier, there are 1 amplifiers.

ADA4000-1ARZ-R7 Features
114dB voltage gain


ADA4000-1ARZ-R7 Applications
There are a lot of Analog Devices Inc.
ADA4000-1ARZ-R7 Instrumentational OP Amps applications.


Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation