Analog Devices Inc. AD8330ACPZ-R7

AD8330ACPZ-R7 Overview
In order to protect the op amps, a 16-WFQFN Exposed Pad, CSP case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It has 16 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 20mA and 10 . In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Differential, Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Instrumentation amplifier shouldn't be used above 85°C . For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 6V. This electronic part is recommended to be used with an 20mA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 6V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.7V when using it. It is important to keep the resistance within the 1.2kOhm range of the linear amplifier. A linear amplifier such as this has 1 amplifiers on it.

AD8330ACPZ-R7 Features
Output Type: Differential, Rail-to-Rail
Resistance of 1.2kOhm


AD8330ACPZ-R7 Applications
There are a lot of Analog Devices Inc.
AD8330ACPZ-R7 Instrumentational OP Amps applications.


Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification