AD8079AR

Analog Devices Inc. AD8079AR

Part Number:
AD8079AR
Manufacturer:
Analog Devices Inc.
Ventron No:
3696430-AD8079AR
Description:
IC OPAMP BUFFER 260MHZ 8SOIC
ECAD Model:
Datasheet:
AD8079AR

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Analog Devices Inc. AD8079AR technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD8079AR.
  • Mounting Type
    Surface Mount
  • Package / Case
    8-SOIC (0.154, 3.90mm Width)
  • Surface Mount
    YES
  • Operating Temperature
    -40°C~85°C
  • Packaging
    Tube
  • JESD-609 Code
    e0
  • Pbfree Code
    no
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • Terminal Finish
    TIN LEAD
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    240
  • Number of Functions
    2
  • Supply Voltage
    5V
  • Reach Compliance Code
    unknown
  • Time@Peak Reflow Temperature-Max (s)
    30
  • Pin Count
    8
  • JESD-30 Code
    R-PDSO-G8
  • Qualification Status
    COMMERCIAL
  • Number of Circuits
    2
  • Current - Supply
    10mA
  • Slew Rate
    800V/μs
  • Amplifier Type
    Buffer
  • Current - Input Bias
    3μA
  • Voltage - Supply, Single/Dual (±)
    6V~12V ±3V~6V
  • Neg Supply Voltage-Nom (Vsup)
    -5V
  • Average Bias Current-Max (IIB)
    10μA
  • Supply Voltage Limit-Max
    6.3V
  • Voltage - Input Offset
    10mV
  • Current - Output / Channel
    70mA
  • 3db Bandwidth
    260MHz
  • Neg Supply Voltage-Max (Vsup)
    -6.3V
  • Length
    4.9mm
  • Height Seated (Max)
    1.75mm
  • RoHS Status
    Non-RoHS Compliant
Description
AD8079AR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Buffer-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureA linear amplifier like this has 2 circuits on it. We recommend that you use this electronic part with an 10mA supply in order to get the best performance from it.

AD8079AR Features
8 Pins
supply voltage of 5V


AD8079AR Applications
There are a lot of Rochester Electronics, LLC
AD8079AR Instrumentational OP Amps applications.


Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
AD8079AR More Descriptions
Non-RoHS Compliant R-PDSO-G8 TIN LEAD Tube op amp buffer circuit 4.9mm 10muA -6.3V 260MHz
High Speed Operational Amplifiers Dual 260MHz Gain Buffer
The AD8079 is a dual, low power, high speed buffer designed to operate on ±5 V supplies. The AD8079's pinout offers excellent input and output isolation compared to the traditional dual amplifier pin configuration. With two ac ground pins separating both the inputs and outputs, the AD8079 achieves very low crosstalk of less than -70 dB at 5 MHz. Additionally, the AD8079 contains gain setting resistors factory set at G = 2.0 (A grade) or Gain = 2.2 (B grade) allowing circuit configurations with minimal external components. The B grade gain of 2.2 compensates for gain loss through a system by providing a single-point trim. Using active laser trimming of these resistors, the AD8079 guarantees tight control of gain and channel-channel gain matching. With its performance and figuration, the AD8079 is well suited for driving differential cables and transformers. Its low distortion and fast settling are ideal for buffering high speed dual or differential A-to-D converters. The AD8079 features a unique transimpedance linearization circuitry. This allows it to drive video loads with excellent differential gain and phase performance of 0.01% and 0.02° on only 50 mW of power per amplifier. It features gain flatness of 0.1 dB to 50 MHz. This makes the AD8079 ideal for professional video electronics such as cameras and video switchers. The AD8079 offers low power of 5 mA/amplifier (VS = ±5 V) and can run on a single 12 V power supply while delivering over 70 mA of load current. All of this is offered in a small 8-pin SOIC package. These features make this amplifier ideal for portable and battery powered applications where size and power are critical. The outstanding bandwidth of 260 MHz along with 800 V/µs of slew rate make the AD8079 useful in many general purpose high speed applications where dual power supplies of ±3 V to ±6 V are required. The AD8079 is available in the industrial temperature range of -40°C to 85°C.
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.