Analog Devices Inc. AD7890BN-10
- Part Number:
- AD7890BN-10
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3006391-AD7890BN-10
- Description:
- IC DAS 12BIT 8CH 24-DIP
- Datasheet:
- AD7890BN-10
Analog Devices Inc. AD7890BN-10 technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD7890BN-10.
- Mounting TypeThrough Hole
- Package / Case24-DIP (0.300, 7.62mm)
- Surface MountNO
- Operating Temperature-40°C~85°C
- PackagingTube
- JESD-609 Codee0
- Pbfree Codeno
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)3 (168 Hours)
- Number of Terminations24
- Terminal FinishTIN LEAD
- TechnologyCMOS
- Voltage - Supply5V
- Terminal PositionDUAL
- Peak Reflow Temperature (Cel)NOT SPECIFIED
- Number of Functions1
- Supply Voltage5V
- Terminal Pitch2.54mm
- Reach Compliance Codeunknown
- Reflow Temperature-Max (s)NOT SPECIFIED
- Pin Count24
- JESD-30 CodeR-PDIP-T24
- Number of Channels8
- Number of Bits12
- Data InterfaceSerial
- Sampling Rate0.117 MHz
- Number of Analog In Channels8
- Sampling Rate (Per Second)117k
- Output Bit Code2'S COMPLEMENT BINARY
- Linearity Error-Max (EL)0.0122%
- Sample and Hold / Track and HoldTRACK
- Analog Input Voltage-Max10V
- Voltage Supply SourceSingle Supply
- Analog Input Voltage-Min-10V
- Conversion Time-Max5.9μs
- Resolution (Bits)12 b
- Height Seated (Max)5.33mm
- Length31.75mm
- Width7.62mm
- RoHS StatusNon-RoHS Compliant
AD7890BN-10 Overview
This specific component is manufactured by Analog Devices Inc. and falls under the category of Data Acquisition - ADCs/DACs - Special Purpose chips. It is designed for acquiring and converting data and belongs to the Data Acquisition - ADCs/DACs - Special Purpose category. The Pbfree Code for this chip is not available, indicating that it may contain lead. The Moisture Sensitivity Level (MSL) is 3, which means it can withstand a humidity level of 168 hours. The chip operates on a supply voltage of 5V. The Reach Compliance Code is not known, indicating that it may not meet certain environmental regulations. The maximum reflow temperature for this chip is not specified. It is classified under the JESD-30 Code R-PDIP-T24, which specifies its package type. This chip has 8 channels for data input. The minimum analog input voltage is -10V. Its width is 7.62mm. This component is not compliant with RoHS standards, meaning it may contain hazardous substances.
AD7890BN-10 Features
Through Hole acquisition unit
8 channels process
12-Bit acquisition unit
AD7890BN-10 Applications
There are a lot of Rochester Electronics, LLC AD7890BN-10 ADCs/DACs applications.
Process Control and Industrial Automation
Precision setpoint control
Digital Offset & Gain Adjustment
Motor Control
Microcontrollers.
Audio Amplifier
Communication Systems
RADAR processing, digital oscilloscopes
DAT Recorders and Players
3-phase power control
This specific component is manufactured by Analog Devices Inc. and falls under the category of Data Acquisition - ADCs/DACs - Special Purpose chips. It is designed for acquiring and converting data and belongs to the Data Acquisition - ADCs/DACs - Special Purpose category. The Pbfree Code for this chip is not available, indicating that it may contain lead. The Moisture Sensitivity Level (MSL) is 3, which means it can withstand a humidity level of 168 hours. The chip operates on a supply voltage of 5V. The Reach Compliance Code is not known, indicating that it may not meet certain environmental regulations. The maximum reflow temperature for this chip is not specified. It is classified under the JESD-30 Code R-PDIP-T24, which specifies its package type. This chip has 8 channels for data input. The minimum analog input voltage is -10V. Its width is 7.62mm. This component is not compliant with RoHS standards, meaning it may contain hazardous substances.
AD7890BN-10 Features
Through Hole acquisition unit
8 channels process
12-Bit acquisition unit
AD7890BN-10 Applications
There are a lot of Rochester Electronics, LLC AD7890BN-10 ADCs/DACs applications.
Process Control and Industrial Automation
Precision setpoint control
Digital Offset & Gain Adjustment
Motor Control
Microcontrollers.
Audio Amplifier
Communication Systems
RADAR processing, digital oscilloscopes
DAT Recorders and Players
3-phase power control
AD7890BN-10 More Descriptions
ADC Single SAR 117ksps 12-bit Serial 24-Pin PDIP
12-BIT, 8 CHANNEL, SERIAL ADC
D/A CONVERTER (D-A) IC
IC DAS 12BIT 117K 24DIP
IC DAS 12BIT 8CH 24-DIP
OEMs, CMs ONLY (NO BROKERS)
The AD7890 is an 8-channel 12-bit data acquisition system. The part contains an input multiplexer, an on-chip track/hold amplifier, a high speed 12-bit ADC, a 2.5 V reference, and a high speed, serial interface. The part operates from a single 5 V supply and accepts an analog input range of ±10 V (AD7890-10), 0 V to 4.096 V (AD7890-4), and 0 V to 2.5 V (AD7890-2). The multiplexer on the part is independently accessible. This allows the user to insert an antialiasing filter or signal conditioning, if required, between the multiplexer and the ADC. This means that one antialiasing filter can be used for all eight channels. Connection of an external capacitor allows the user to adjust the time given to the multiplexer settling to include any external delays in the filter or signal conditioning circuitry. Output data from the AD7890 is provided via a high speed bidirectional serial interface port. The part contains an on-chip control register, allowing control of channel selection, conversion start, and power-down via the serial port. Versatile, high speed logic ensures easy interfacing to serial ports on microcontrollers and digital signal processors. In addition to the traditional dc accuracy specifications such as linearity, full-scale, and offset errors, the AD7890 is also specified for dynamic performance parameters including harmonic distortion and signal-to-noise ratio. Power dissipation in normal mode is low at 30 mW typical and the part can be placed in a standby (power-down) mode if it is not required to perform conversions. The AD7890 is fabricated in Analog Devices, Inc.'s Linear Compatible CMOS (LC2MOS) process, a mixed technology process that combines precision bipolar circuits with low power CMOS logic. The part is available in a 24-lead, 0.3" wide, plastic or ceramic dual-in-line package or in a 24-lead small outline package (SOIC_W). Product Highlights Complete 12-Bit Data Acquisition System-on-a-Chip. The AD7890 is a complete monolithic ADC combining an 8-channel multiplexer, 12-bit ADC, 2.5 V reference, and a track/hold amplifier on a single chip. Separate Access to Multiplexer and ADC. The AD7890 provides access to the output of the multiplexer allowing one antialiasing filter for 8 channels—a considerable savings over the 8 antialiasing filters required if the multiplexer is internally connected to the ADC. High Speed Serial Interface. The part provides a high speed serial interface for easy connection to serial ports of microcontrollers and DSP processors.
12-BIT, 8 CHANNEL, SERIAL ADC
D/A CONVERTER (D-A) IC
IC DAS 12BIT 117K 24DIP
IC DAS 12BIT 8CH 24-DIP
OEMs, CMs ONLY (NO BROKERS)
The AD7890 is an 8-channel 12-bit data acquisition system. The part contains an input multiplexer, an on-chip track/hold amplifier, a high speed 12-bit ADC, a 2.5 V reference, and a high speed, serial interface. The part operates from a single 5 V supply and accepts an analog input range of ±10 V (AD7890-10), 0 V to 4.096 V (AD7890-4), and 0 V to 2.5 V (AD7890-2). The multiplexer on the part is independently accessible. This allows the user to insert an antialiasing filter or signal conditioning, if required, between the multiplexer and the ADC. This means that one antialiasing filter can be used for all eight channels. Connection of an external capacitor allows the user to adjust the time given to the multiplexer settling to include any external delays in the filter or signal conditioning circuitry. Output data from the AD7890 is provided via a high speed bidirectional serial interface port. The part contains an on-chip control register, allowing control of channel selection, conversion start, and power-down via the serial port. Versatile, high speed logic ensures easy interfacing to serial ports on microcontrollers and digital signal processors. In addition to the traditional dc accuracy specifications such as linearity, full-scale, and offset errors, the AD7890 is also specified for dynamic performance parameters including harmonic distortion and signal-to-noise ratio. Power dissipation in normal mode is low at 30 mW typical and the part can be placed in a standby (power-down) mode if it is not required to perform conversions. The AD7890 is fabricated in Analog Devices, Inc.'s Linear Compatible CMOS (LC2MOS) process, a mixed technology process that combines precision bipolar circuits with low power CMOS logic. The part is available in a 24-lead, 0.3" wide, plastic or ceramic dual-in-line package or in a 24-lead small outline package (SOIC_W). Product Highlights Complete 12-Bit Data Acquisition System-on-a-Chip. The AD7890 is a complete monolithic ADC combining an 8-channel multiplexer, 12-bit ADC, 2.5 V reference, and a track/hold amplifier on a single chip. Separate Access to Multiplexer and ADC. The AD7890 provides access to the output of the multiplexer allowing one antialiasing filter for 8 channels—a considerable savings over the 8 antialiasing filters required if the multiplexer is internally connected to the ADC. High Speed Serial Interface. The part provides a high speed serial interface for easy connection to serial ports of microcontrollers and DSP processors.
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
06 September 2023
A4988 Characteristics, Application and Basic Principle
A4988 is an efficient and commonly used stepper motor driver chip, widely used in 3D printing and CNC machine tools and other fields. We will discuss in depth... -
07 September 2023
What Is The Difference Between NE5532 And RC4558D?
Ⅰ. Overview of NE5532NE5532 is a dual operational amplifier chip with excellent performance and low noise characteristics. Its circuit design is similar to that of a common operational... -
07 September 2023
TPC8129 Internal Circuit, Specifications, Application and Marking
Ⅰ. Overview of TPC8129TPC8129 is a product of Toshiba, a Japanese comprehensive electronic and electrical company. It is a chip for LED driver circuits and is mainly used... -
12 September 2023
The Difference Between L293D and L298N
In this article we will explore the main differences between the L293D and L298N motor drivers. Both motor drives have their own unique features and applications. Understanding the...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.