Analog Devices Inc. AD5253BRU50-RL7
- Part Number:
- AD5253BRU50-RL7
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3020844-AD5253BRU50-RL7
- Description:
- IC DGTL POT QUAD 50K 20-TSSOP
- Datasheet:
- AD5253BRU50-RL7
Analog Devices Inc. AD5253BRU50-RL7 technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD5253BRU50-RL7.
- Contact PlatingLead, Tin
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / Case20-TSSOP (0.173, 4.40mm Width)
- Number of Pins20
- Operating Temperature-40°C~105°C
- PackagingTape & Reel (TR)
- Tolerance±20%
- JESD-609 Codee0
- FeatureSelectable Address
- Pbfree Codeno
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations20
- ECCN CodeEAR99
- Temperature Coefficient300 ppm/°C
- Resistance50kOhm
- Number of Positions64
- Terminal FinishTin/Lead (Sn85Pb15)
- TechnologyCMOS
- Voltage - Supply2.7V~5.5V ±2.25V~2.75V
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)240
- Number of Functions4
- Supply Voltage2.5V
- Terminal Pitch0.65mm
- Frequency400kHz
- Reflow Temperature-Max (s)30
- Base Part NumberAD5253
- Pin Count20
- Operating Supply Voltage2.75V
- Power Supplies3/5V
- ConfigurationPotentiometer
- InterfaceI2C
- Number of Circuits4
- Nominal Supply Current3μA
- Memory TypeNon-Volatile
- Max Supply Current5μA
- Quiescent Current5μA
- Bandwidth0.08 kHz
- TaperLinear
- Max Dual Supply Voltage2.75V
- Min Dual Supply Voltage2.25V
- Dual Supply Voltage2.5V
- Negative Supply Voltage-Nom-2.5V
- Number of Taps64
- Total Resistance50000Ohm
- Resistance - Wiper (Ω) (Typ)200
- Temperature Coefficient (Typ)650ppm/°C
- Height Seated (Max)1.2mm
- Length6.5mm
- Radiation HardeningNo
- RoHS StatusNon-RoHS Compliant
- Lead FreeContains Lead
AD5253BRU50-RL7 Overview
Analog Devices Inc. offers a Data Acquisition - Digital Potentiometers chip, specifically designed for the Data Acquisition - Digital Potentiometers category. This chip features Lead and Tin contact plating, a supply voltage of 2.5V, and a configuration of Potentiometer. It also has a non-volatile memory type and a maximum supply current of 5μA. With a bandwidth of 0.08 kHz and a linear taper, this chip operates on a dual supply voltage of 2.5V and a negative supply voltage of -2.5V. Additionally, it has 64 taps for precise control.
AD5253BRU50-RL7 Features
Available in 20-TSSOP (0.173, 4.40mm Width) package
4 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~105°C
20 pins
Operate supply voltage at the range of 2.75V
Quiescent Current at 5μA
AD5253BRU50-RL7 Applications
There are a lot of Analog Devices Inc. AD5253BRU50-RL7 Digital Potentiometers applications.
Instrumentation (gain or offset adjustment)
Replaces mechanical potentiometers
Optic fiber network
Contrast control of monitors
Used as voltage divider
Automatic detection of equipment
Programmable low pass filter
Power meter
Automotive electronics
Healthcare Products
Analog Devices Inc. offers a Data Acquisition - Digital Potentiometers chip, specifically designed for the Data Acquisition - Digital Potentiometers category. This chip features Lead and Tin contact plating, a supply voltage of 2.5V, and a configuration of Potentiometer. It also has a non-volatile memory type and a maximum supply current of 5μA. With a bandwidth of 0.08 kHz and a linear taper, this chip operates on a dual supply voltage of 2.5V and a negative supply voltage of -2.5V. Additionally, it has 64 taps for precise control.
AD5253BRU50-RL7 Features
Available in 20-TSSOP (0.173, 4.40mm Width) package
4 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~105°C
20 pins
Operate supply voltage at the range of 2.75V
Quiescent Current at 5μA
AD5253BRU50-RL7 Applications
There are a lot of Analog Devices Inc. AD5253BRU50-RL7 Digital Potentiometers applications.
Instrumentation (gain or offset adjustment)
Replaces mechanical potentiometers
Optic fiber network
Contrast control of monitors
Used as voltage divider
Automatic detection of equipment
Programmable low pass filter
Power meter
Automotive electronics
Healthcare Products
AD5253BRU50-RL7 More Descriptions
Digital Potentiometer 64POS 50KOhm Quad 20-Pin TSSOP T/R
IC DGTL POT 50KOHM 64TAP 20TSSOP
The AD5253/AD5254 are quad-channel, I2C®, nonvolatile mem-ory, digitally controlled potentiometers with 64/256 positions, respectively. These devices perform the same electronic adjust-ment functions as mechanical potentiometers, trimmers, and variable resistors. The parts’ versatile programmability allows multiple modes of operation, including read/write access in the RDAC and EEMEM registers, increment/decrement of resistance, resistance changes in ±6 dB scales, wiper setting readback, and extra EEMEM for storing user-defined information, such as memory data for other components, look-up table, or system identification information. The AD5253/AD5254 allow the host I2C controllers to write any of the 64-/256-step wiper settings in the RDAC registers and store them in the EEMEM. Once the settings are stored, they are restored automatically to the RDAC registers at system power-on; the settings can also be restored dynamically. The AD5253/AD5254 provide additional increment, decrement, 6 dB step change, and –6 dB step change in synchronous or asynchronous channel update mode. The increment and decrement functions allow stepwise linear adjustments, with a ± 6 dB step change equivalent to doubling or halving the RDAC wiper setting. These functions are useful for steep-slope, nonlinear adjustments, such as white LED brightness and audio volume control. The AD5253/AD5254 have a patented resistance-tolerance storing function that allows the user to access the EEMEM and obtain the absolute end-to-end resistance values of the RDACs for precision applications. The AD5253/AD5254 are available in TSSOP-20 packages in 1 kO, 10 kO, 50 kO, and 100 kO options. All parts are guaranteed to operate over the –40°C to 85°C extended industrial temperature range. 1The terms nonvolatile memory and EEMEM are used interchangeably. 2The terms digital potentiometer and RDAC are used interchangeably.
IC DGTL POT 50KOHM 64TAP 20TSSOP
The AD5253/AD5254 are quad-channel, I2C®, nonvolatile mem-ory, digitally controlled potentiometers with 64/256 positions, respectively. These devices perform the same electronic adjust-ment functions as mechanical potentiometers, trimmers, and variable resistors. The parts’ versatile programmability allows multiple modes of operation, including read/write access in the RDAC and EEMEM registers, increment/decrement of resistance, resistance changes in ±6 dB scales, wiper setting readback, and extra EEMEM for storing user-defined information, such as memory data for other components, look-up table, or system identification information. The AD5253/AD5254 allow the host I2C controllers to write any of the 64-/256-step wiper settings in the RDAC registers and store them in the EEMEM. Once the settings are stored, they are restored automatically to the RDAC registers at system power-on; the settings can also be restored dynamically. The AD5253/AD5254 provide additional increment, decrement, 6 dB step change, and –6 dB step change in synchronous or asynchronous channel update mode. The increment and decrement functions allow stepwise linear adjustments, with a ± 6 dB step change equivalent to doubling or halving the RDAC wiper setting. These functions are useful for steep-slope, nonlinear adjustments, such as white LED brightness and audio volume control. The AD5253/AD5254 have a patented resistance-tolerance storing function that allows the user to access the EEMEM and obtain the absolute end-to-end resistance values of the RDACs for precision applications. The AD5253/AD5254 are available in TSSOP-20 packages in 1 kO, 10 kO, 50 kO, and 100 kO options. All parts are guaranteed to operate over the –40°C to 85°C extended industrial temperature range. 1The terms nonvolatile memory and EEMEM are used interchangeably. 2The terms digital potentiometer and RDAC are used interchangeably.
The three parts on the right have similar specifications to AD5253BRU50-RL7.
-
ImagePart NumberManufacturerContact PlatingMountMounting TypePackage / CaseNumber of PinsOperating TemperaturePackagingToleranceJESD-609 CodeFeaturePbfree CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsECCN CodeTemperature CoefficientResistanceNumber of PositionsTerminal FinishTechnologyVoltage - SupplyTerminal PositionTerminal FormPeak Reflow Temperature (Cel)Number of FunctionsSupply VoltageTerminal PitchFrequencyReflow Temperature-Max (s)Base Part NumberPin CountOperating Supply VoltagePower SuppliesConfigurationInterfaceNumber of CircuitsNominal Supply CurrentMemory TypeMax Supply CurrentQuiescent CurrentBandwidthTaperMax Dual Supply VoltageMin Dual Supply VoltageDual Supply VoltageNegative Supply Voltage-NomNumber of TapsTotal ResistanceResistance - Wiper (Ω) (Typ)Temperature Coefficient (Typ)Height Seated (Max)LengthRadiation HardeningRoHS StatusLead FreeFactory Lead TimeLifecycle StatusOperating Supply Current3db BandwidthResistor Terminal Voltage-MaxAdditional FeatureHeightWidthREACH SVHCView Compare
-
AD5253BRU50-RL7Lead, TinSurface MountSurface Mount20-TSSOP (0.173, 4.40mm Width)20-40°C~105°CTape & Reel (TR)±20%e0Selectable AddressnoObsolete1 (Unlimited)20EAR99300 ppm/°C50kOhm64Tin/Lead (Sn85Pb15)CMOS2.7V~5.5V ±2.25V~2.75VDUALGULL WING24042.5V0.65mm400kHz30AD5253202.75V3/5VPotentiometerI2C43μANon-Volatile5μA5μA0.08 kHzLinear2.75V2.25V2.5V-2.5V6450000Ohm200650ppm/°C1.2mm6.5mmNoNon-RoHS CompliantContains Lead----------
-
TinSurface MountSurface Mount10-TFSOP, 10-MSOP (0.118, 3.00mm Width)10-40°C~85°CTape & Reel (TR)±30%e3-noActive1 (Unlimited)10EAR99500 ppm/°C50kOhm256--2.7V~5.5V ±2.3V~2.7VDUALGULL WING26015V0.5mm-30AD5200102.7V-2.5/3/5VPotentiometerSPI115μAVolatile15μA15μA0.6 kHzLinear2.7V2.3V2.5V-25650000Ohm50--3mmNoROHS3 CompliantContains Lead8 WeeksPRODUCTION (Last Updated: 4 weeks ago)15μA600 kHz5V----
-
Lead, TinSurface MountSurface Mount24-TSSOP (0.173, 4.40mm Width)24-40°C~85°CTape & Reel (TR)±30%e0Cascade Pin, Selectable AddressnoObsolete1 (Unlimited)24EAR99700 ppm/°C50kOhm256Tin/Lead (Sn/Pb)-2.7V~5.5V ±2.3V~2.7VDUALGULL WING22042.5V0.65mm-30AD520424-3/5VPotentiometerSPI412μAVolatile12μA12μA0.137 kHzLinear2.7V2.3V2.5V-2.5V25650000Ohm50-1.2mm7.8mmNoNon-RoHS Compliant------CAN ALSO OPERATE FROM /-2.3V TO /-2.7V SUPPLY---
-
TinSurface MountSurface Mount24-TSSOP (0.173, 4.40mm Width)24-40°C~85°CTube±30%e3Cascade Pin, Selectable AddressnoActive1 (Unlimited)24EAR99700 ppm/°C10kOhm256--2.7V~5.5V ±2.3V~2.7VDUALGULL WING26042.5V0.65mm-40AD520424-3/5VPotentiometerSPI412μAVolatile12μA12μA0.721 kHzLinear2.7V2.3V2.5V-2.5V25610000Ohm50--7.8mmNoROHS3 CompliantContains Lead8 WeeksPRODUCTION (Last Updated: 1 month ago)12μA721 kHz-CAN ALSO OPERATE FROM /-2.3V TO /-2.7V SUPPLY1.05mm4.4mmNo SVHC
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
06 September 2023
A4988 Characteristics, Application and Basic Principle
A4988 is an efficient and commonly used stepper motor driver chip, widely used in 3D printing and CNC machine tools and other fields. We will discuss in depth... -
07 September 2023
What Is The Difference Between NE5532 And RC4558D?
Ⅰ. Overview of NE5532NE5532 is a dual operational amplifier chip with excellent performance and low noise characteristics. Its circuit design is similar to that of a common operational... -
07 September 2023
TPC8129 Internal Circuit, Specifications, Application and Marking
Ⅰ. Overview of TPC8129TPC8129 is a product of Toshiba, a Japanese comprehensive electronic and electrical company. It is a chip for LED driver circuits and is mainly used... -
12 September 2023
The Difference Between L293D and L298N
In this article we will explore the main differences between the L293D and L298N motor drivers. Both motor drives have their own unique features and applications. Understanding the...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.