Texas Instruments 2U3837J25QDBVRG4Q1

2U3837J25QDBVRG4Q1 Overview
As you can see, this power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. When 1.8V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. This power management has 5 pins. Supply voltage (Vsup) should be at least 1.6V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 25μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using 3837J25, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 25μA. A PMIC from the well-known Automotive, AEC-Q100 series of products is being offered here.

2U3837J25QDBVRG4Q1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
25μA operating supply current


2U3837J25QDBVRG4Q1 Applications
There are a lot of Texas Instruments
2U3837J25QDBVRG4Q1 Voltage Supervisors applications.


emergency room
Medical-specific isolation transformer
Medical-specific insulation monitor
Transformer load monitoring equipment
External alarm
Display equipment
DC stabilized power supply module
Insulation fault location system
Magnetic resonance imaging
Stable power system