Xilinx Inc. XC2C512-7PQG208C

XC2C512-7PQG208C Overview
This network has 512macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the 208-BFQFP package.There are 173 I/Os programmed in it.It is programmed that device terminations will be 208 .QUADis the terminal position of this electrical part.The device is powered by a voltage of 1.8V volts.It is a part of the family [0].Trayshould be used for packaging the chip.To ensure reliability, the device operates at a temperature of [0].Ensure that the chip is mounted by Surface Mount.This type of FPGA is a part of the CoolRunner II series.With 208pins programmed, the chip is ready to use.If you use this device, you will also find [0].In accordance with the [0], its related parts are listed.As a building block for digital circuits, there are 12000gates.It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.Surface Mountis the mounting point of this electronic part.208pins are included in its design.Supply voltage (Vsup) reaches a maximum of 1.9V.It is important to make sure that the maximum frequency is less than 179MHz.There are 32 logic elements/cells to form a fundamental building block.

XC2C512-7PQG208C Features
208-BFQFP package
173 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
208 pins

XC2C512-7PQG208C Applications
There are a lot of Xilinx Inc. XC2C512-7PQG208C CPLDs applications.

Network Interface Card (NIC) and Host Bus Adapter (HBA)
Bootloaders for FPGAs
Power automation
ROM patching
Software Configuration of Add-In Boards
D/T registers and latches
Page register
Pattern recognition
INTERRUPT SYSTEM
Digital designs