Texas Instruments UCC28517DWR

UCC28517DWR Overview
This product comes in a 20-SOIC (0.295, 7.50mm Width) package.As you can see, it's packaged in a Tape & Reel (TR)-shape.It has a Surface Mount mounting type.The voltage supply of 9.7V~18V should be used to operate it.Currently, the device is set to operate at a frequency of -40°C~105°C.Other IC types exist, such as POWER FACTOR CONTROLLER WITH POST REGULATOR.On the gadget, there are several 20 terminals.There is a current of 100μA at startup.There is no change to the pin number of the component.One of the best parts of the device is the fact that it has a number of UCC28517.Switching frequency 200kHz is what determines the switching frequency.There are a total of 20 pins on it.With a minimum input voltage of 10.8V, it can function.I suppose it can be considered a subclass of Switching Regulator or Controllers.The maximum input voltage (Max) of the circuit is 15V.This device can continue to function accurately with a frequency of 500kHz.A maximum of 3.5A output current is provided by itA 12V-volt supply is always used to power the component.There should be a limit on ISUP, the maximum supply current, so that it does not exceed 4mA.There are other features such as PEAK CURRENT MODE ALSO AVAILABLE to name a few.

UCC28517DWR Features

UCC28517DWR Applications
There are a lot of Texas Instruments UCC28517DWR PFC PMICs applications.

Body control modules
Post DC-DC regulation
Battery-powered device
Digital TV
LED lighting
Communication device
4WD transfercase
Signal chain
Decoupling circuit
Desktop microcomputer systems