Texas Instruments UCC2800D

UCC2800D Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 6.9V~12V. Qualified to work in an dc switcher with -40°C~85°C TA. In this switching controller, the switch can be set to 46kHz. dc dc regulator can be generalized using Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 8. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. You can find other relevant dc to dc converter ics by searching "UCC2800". Total pins of switching converter are 8. There is a particular type of Switching Regulator or Controllers in switching converter. This dc dc voltage regulator should be powered by a voltage of 7.5V. According to the test statistics, DC regulator outputs 5.075V voltage. If you start a project, note down the dc dc regulator's usual output current of 1A. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The switching controller works at a frequency of 1MHz. The supply voltage should be 10V. There should be 25mA current exceeding 25mA supplied to the controller. There is 500μA nominal current supply for this the controllers dc.

UCC2800D Features
Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC2800D Applications
There are a lot of Texas Instruments UCC2800D DC to DC converter applications.

Motor controller circuits
Cutting machine tools
Correction machines
Product burn-in
Balance equipment
Radio equipment
Combined machine tools
Electrical distribution systems
PSRR circuits
Wide-range voltage regulation circuits