UC2524ADW

• Factory Lead Time
  6 Weeks
• Lifecycle Status
  ACTIVE (Last Updated: 4 days ago)
• Mounting Type
  Surface Mount
• Package / Case
  16-SOIC (0.295, 7.50mm Width)
• Surface Mount
  YES
• Number of Pins
  16
• Weight
  473.692182mg
• Operating Temperature
  -40°C~85°C TA
• Packaging
  Tube
• JESD-609 Code
  e4
• Pbfree Code
  yes
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  2 (1 Year)
• Number of Terminations
  16
• ECCN Code
  EAR99
• Terminal Finish
  Nickel/Palladium/Gold (Ni/Pd/Au)
• Subcategory
  Switching Regulator or Controllers
• Technology
  BIPOLAR
• Terminal Position
  DUAL
• Terminal Form
  GULL WING
• Peak Reflow Temperature (Cel)
  260
• Frequency
  450kHz
• Base Part Number
  UC2524
• Function
  Step-Up, Step-Up/Step-Down
• Number of Outputs
  2
• Output Voltage
  60V
• Output Type
  Transistor Driver
• Input Voltage-Nom
  20V
• Analog IC - Other Type
  SWITCHING CONTROLLER
• Output Configuration
  Positive
• Output Current
  100mA
• Voltage - Supply (Vcc/Vdd)
  8V~40V
• Quiescent Current
  5mA
• Control Features
  Frequency Control
• Topology
  Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
• Control Mode
  VOLTAGE-MODE
• Frequency - Switching
  500kHz
• Control Technique
  PULSE WIDTH MODULATION
• Rise Time
  120ns
• Synchronous Rectifier
  No
• Fall Time (Typ)
  25 ns
• Nominal Input Voltage
  40V
• Max Duty Cycle
  50 %
• Duty Cycle (Max)
  45%
• Output Phases
  1
• Height
  2.65mm
• Length
  10.3mm
• Width
  7.5mm
• Thickness
  2.35mm
• REACH SVHC
  No SVHC
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

UC2524ADW Overview
It comes in the 16-SOIC (0.295, 7.50mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 2 output generation. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. A 8V~40V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 500kHz position. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. Various 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 20V. Other relevant dc to dc converter ics can be found by searching "UC2524". There are 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 60V voltage. If you start a project, note down the dc dc regulator's usual output current of 100mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. Switching controller operates at 450kHz Hz. As long as the dc switching is in a dormant state, it utilizes 5mA. A nominal working status is achieved when the input voltage is set to 40V.

UC2524ADW Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz

UC2524ADW Applications
There are a lot of Texas Instruments UC2524ADW DC to DC converter applications.

Gear/thread machining machines
Computed tomography (CT)
Automatic plug-in machines
Emergency lighting monitoring equipment
PSRR circuits
Electric water heaters
Domestic water pumps
Network technology
seismic instrument power circuits
Access control systems