Texas Instruments TVP5147M1IPFP

TVP5147M1IPFP Overview
An embedded encoder is contained in a 80-TQFP Exposed Pad package.The encoder should be packed in a Tray case.Surface Mount is used for mounting this motor encoder.As a type, it falls under the Video Decoder category.The encoder connected in LCD TV/Monitor is suitable for this connector.The motor encoder belongs to the TVP5147 family.The optical encoder uses the 1.8V 3.3V digital power for switching power supplies.A 80 termination is available on the optical encoder.By applying voltage to 1.8V 3.3V, the analog supply voltage can be applied.There are a total of 80 pins on the rotary encoders.Surface Mount mounts it on the wall.It has 80 pins.Using a maximum 85°C value ensures that the encoder reader runs as stable as possible.It is essential that this rotary encoder's minimum working temperature does not fall below -40°C°C.The value of 1.7V should be greater than the minimum supply voltage.The electronic rotary encoders is from Color Signal Converters family.As the maximum supply voltage (Vsup) for a encoder motor reaches 1.9V, the encoder motor is considered to be fully operational.A supply voltage of 3.6V is required to operate this converter.The total number of bits on an encoder is 10, which is the number of bits on the chip.On the board of this rotary encoder there are 2 A/D converters.IT ALSO REQUIRES 3V TO 3.6V DIGITAL SUPPLY can also be founded when utilizing this rotary encoder.It operates at 135mA supply current.

TVP5147M1IPFP Features
In 80-TQFP Exposed Pad package
Mounting Type: Surface Mount
Base Part Number: TVP5147
80 pins
10 bits
2 A/D Converters

TVP5147M1IPFP Applications
There are a lot of Texas Instruments TVP5147M1IPFP Encoders, Decoders, Converters applications.

Portable navigation
Military
Audio
Home Automation
Imaging
PDAs
Remote Device Control
Optical Networking
Car Starters
Wireless