Texas Instruments TPS74701DRCR

TPS74701DRCR Description
The Terminal Finish for this device is Nickel/Palladium/Gold (Ni/Pd/Au), which provides excellent corrosion resistance and solderability. The Packing Method used for this component is TR, which means it is tape and reel packaged for ease of handling and automated assembly. The Terminal Position is DUAL, indicating that there are terminals on both sides of the device. With a Pin Count of 10, this regulator can accommodate a variety of applications. The Output Configuration is Positive, ensuring that the output voltage is always greater than the input voltage. With an Accuracy of 2%, this regulator provides precise and stable voltage regulation. It features multiple Protection Features, including Over Current, Over Temperature, Short Circuit, and Under Voltage Lockout (UVLO), ensuring the safety and reliability of the system. The Minimum Current Limit is 800mA, guaranteeing that the regulator can handle a wide range of loads. With a width of only 3mm, this device is compact and suitable for space-constrained applications.

TPS74701DRCR Features
VOUT Range: 0.8 V to 3.6 V
Ultralow VIN Range: 0.8 V to 5.5 V
VBIAS Range 2.7 V to 5.5 V
Low Dropout: 50 mV Typically at 500 mA, VBIAS = 5 V
Power Good (PG) Output Allows Supply Monitoring or Provides a Sequencing Signal for Other Supplies
2% Accuracy Over Line, Load, and Temperature
Programmable Soft-Start Provides Linear Voltage Start-Up
VBIAS Permits Low VIN Operation With Good Transient Response
Stable With Any Output Capacitor ≥ 2.2 μF
Available in a Small 3-mm × 3-mm × 1-mm 10-Pin Package


TPS74701DRCR Applications
FPGA Applications
DSP Core and I/O Voltages
Post-Regulation Applications
Applications With Special Start-Up Time or Sequencing Requirements
Hot-Swap and Inrush Controls