Texas Instruments TPS2376DDA-HG4

TPS2376DDA-HG4 Overview
As part of the Tube package, PoE controller is embedded.It is packaged in the way of 8-PowerSOIC (0.154, 3.90mm Width).PoE controller is a Controller (PD) type electronic part.The number of channels is growing strong/weak: 1.Ensure the reliability of the PoE by operating it at -40°C~85°C.A 0V~57V voltage is used to supply power to this electrical Po E controller.It is possible to find the Po E controllers of the base part number by using the base part number TPS2376.8 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.Count of 8 pins is included.A Po E controller like this is included in Power Management Circuits.There is a 8 pin design on this board.There is a 260 thermal peak of this electrical ethernet power controller (Cel).48V should be greater than the supply voltage.Upon reaching 0.6mA, Isup reaches its maximal current.For 240μA to perform fully, a supply current must be provided.With its maximum design flexibility, 350mA boasts one of the highest output currents on the market.This PoE controller requires a supply voltage of 57V to function properly.1Ohm (*) represents the PoE controller's resistance.A 12.95W watt power output is achieved by this ethernet over power controller.An power over ethernet controller such as this one produces a voltage of 100V as its output voltage.

TPS2376DDA-HG4 Features
Tube package
8 pin count
8 pins
The output current of 350mA
1Ohm (Ω)

TPS2376DDA-HG4 Applications
There are a lot of Texas Instruments TPS2376DDA-HG4 Power Over Ethernet (PoE) Controllers applications.

Security Cameras
High Power Wireless Data Systems
Public Information Displays
IEEE 802.3bt (Draft) Compliant Devices
Dual Signature PD/Forced UPOE
Multiband access points
POS Terminals
Commercial Information Displays
Lighting
Pico-base Stations