Texas Instruments TPS2114APW

TPS2114APW Overview
The case that it comes in is called 8-TSSOP (0.173, 4.40mm Width) case. A Tube case is a good choice for packing the part. There is a Surface Mount-axis mounted on the part. There is a voltage of 2.8V~5.5V applied to it. The minimum operating temperature of this component must not be -40°C~85°C. It fits the Handheld/Mobile Devices-connected component. A Source Selector Switch device is categorized as such. In this case, the FET type can be recognized as N-Channel. In the part there are 8 terminations that are available. There are 8 pins on the board and it is designed with them. TPS2114 underpins the part. 2.8V provides its performance. To run 260, we utilize the part's peak reflow temperature. There is a part of the Power Management Circuits family that is used in this part. This part contains 8 pins that are located on the surface. A supply current of 55μA is used to operate the device when it is in operation. There should be a current flow in the supply line (Isup) under 0.09mA. Outputs with 1 are available. Chips can be used with input voltages of more than 5.5V volts. Low input voltages of less than 2.8V volts will not damage the chip. This part is capable of being delivered with an output current of 750mA. The component can be delivered a current of 750mA as an output. When supplied with a voltage of 5.5V, this device will function. This part has a 2 input that allows it to run.

TPS2114APW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2114APW Applications
There are a lot of Texas Instruments TPS2114APW Ideal Diode controller applications.

Automotive infotainment systems - head unit,telematics control unit
Active ORing for redundant power supplies
Digital Cameras
AC Rectifier
Automotive ADAS systems - camera
MP3 Players
ADAS domain controller
Automotive USB hubs
Motor drives
USB HUBs