Texas Instruments TPS2111PWG4

TPS2111PWG4 Overview
There is a TSSOP case that comes with it. Among the options available for the part are 8 terminations. In this case, 8 pins have been used to design it. It is powered by 2.8V to deliver its perfomance. For the purpose of running 260, this part's peak reflow temperature is utilized. In this case, the part belongs to the Power Management Circuits family. As you can see, the part is equipped with 8 pins. 55μA is the supply current that is used for the operation of the device. If 0.09mA is greater than 0, the supply current (Isup) should conduct. There are outputs that can be connected to 1. Using the chip over 5.5V volts is allowed. Low input voltages of less than 2.8V volts will not damage the chip. The part can be delivered under 1.25A output current. It can be operated at 5.5V supply voltage. Run-by-2 inputs are provided on the part. The part should be used when the temperature above -40°C. It is recommended to use the part when the temperature falls below 85°C. 84mOhm should be used for determining the device resistance.

TPS2111PWG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2111PWG4 Applications
There are a lot of Texas Instruments TPS2111PWG4 Ideal Diode controller applications.

Cell phones
AC Rectifier
Alternator
Automotive infotainment systems - head unit,telematics control unit
Active ORing for redundant power
Factory automation and control - PLC digital output modules
Reverse Polarity Protection
Automotive USB hubs
Active ORing for redundant power supplies
USB HUBs