Texas Instruments TLV3401IDBVR

TLV3401IDBVR Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.A comparator with an output type of CMOS, Open-Drain is being used.The part is shipped by Cut Tape (CT) .The comparator has 5 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator is possible to classify the chip as General Purpose .A total of 1 elements can be found in it.The pinout of the component starts from 5 pins it has.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator is equipped with 5 pins.Search TLV3401 to find more pin-to-pin solutions.There is a quiescent current of 950nA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 640nA for normal use.The compartator could be damaged if the current supply exceeds 550nA .Input current to the device cannot exceed 250pA .According to the voltage formula, the part has a voltage gain of 120dB .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.

TLV3401IDBVR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB

TLV3401IDBVR Applications
There are a lot of Texas Instruments TLV3401IDBVR linear comparators applications.

Infotainment & cluster
Analog front end
Point of load regulators
Wireless Base Stations
Battery-Powered Electronics
Current and voltage sensing
Alarm and Monitoring Circuits
Hand-Held Electronics
Metering Systems
Laptop Computers