Texas Instruments TLC5941PWP

TLC5941PWP Overview
Board space is saved by its 28-PowerTSSOP (0.173, 4.40mm Width) package.LED drivers use 16 outputs for their design.It is possible to mount the led driver using Surface Mount.Linear emerges with high efficiency and reliability.It is possible for the led driver ic to function normally at -40°C~85°C TA.Backlight, Signage provides many benefits.In this case, the frequency is 30MHz.In this case, the terminations are set to 28.It has a base of 28 pins.A total of 16 segments have been created.This is mounted by Surface Mount.TLC5941 is the base part number for the LED driver.It is acceptable to operate with a supply voltage of 5.5V.A voltage output of 17V is provided by this device.There are 28 pins on it.According to its characteristics, it is also categorized into Display Drivers.This device requires a minimum voltage of 3V volts.To meet highest efficiency standards, it works on a supply voltage of 3V.In the case of supply current, there is a maximum value of 5.5V.When the maximum supply current is less than 60mA, this device is able to provide high efficiency.The current that can be supplied to the load is 80mA.Powering systems requires 5V voltages.

TLC5941PWP Features
Available in the 28-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
Operating with the supply voltage of 5V

TLC5941PWP Applications
There are a lot of Texas Instruments TLC5941PWP LED Driver ICs applications.

Down lighting
Panel lighting
A- lamps
Museum lighting
LED Lightings for Inspection Devices
Portable lighting
Medical surgery lighting
Stage Lighting and Signage
LED backlight driver for LCD displays for Tablets and Note PCs
LED headlights