Texas Instruments TLC393IP

TLC393IP Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .There is a MOS, Open-Drain output type for this comparator.Electronic comparator is shipped by Tube .The comparator has 8 terminals.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.Currently, it consists of only 2 elements.Electronic comparator has 8 pins.The recommended mounting type is Through Hole .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search TLC393 for more options.There is a quiescent current of 65μA in this comparator.The PCB or other board can be mounted using the Through Hole on it.Electronic comparator is recommended that the nominal supply current for the device be set to 40μA .Current supply exceeding 20μA could cause disfunction of the compartator.5V power supplies are enough to run the device.In this case, the part is from the LinCMOS? comparator series.In order to operate normally, a supply voltage of 0 is required.

TLC393IP Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA

TLC393IP Applications
There are a lot of Texas Instruments TLC393IP linear comparators applications.

Point of load regulators
Portable and Battery-Powered Systems
Limit Comparators
Laptop Computers
Wireless Base Stations
Power management
Mobile Communications
Consumer Medical Electronics
Set Top Boxes
Simple Analog-to-Digital Converters (ADCs)