Texas Instruments TLC393CDR

TLC393CDR Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type MOS, Open-Drain output.This chip is designed with the Tape & Reel (TR) package.As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator families.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical General Purpose comparator.This element consists of 2 elements in total.Electronic comparator has 8 pins.The recommended mounting type is Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLC393 .There is a quiescent current of 50μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 40μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 20μA .In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input a maximum of 5pA current into the device.The part is from LinCMOS? comparator series.The operating supply voltage for normal operation should be 5V .Packed in TR , this device is for general uses (often in ADC circuits).

TLC393CDR Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 50μA

TLC393CDR Applications
There are a lot of Texas Instruments TLC393CDR linear comparators applications.

System control and monitoring
Infotainment and Clusters
Infotainment & cluster
Point of load regulators
Hand-Held Electronics
Threshold Detectors
Notebooks and PDAs
Zero-Crossing Detectors
Self-diagnostics
Window Comparators, Multivibrators