Texas Instruments TLC14IDG4

TLC14IDG4 Overview
As far as packaging is concerned, it comes in a 8-SOIC (0.154, 3.90mm Width) package.Packaged in a Tube format.A Surface Mount mount is used for mounting the gadget.Butterworth, Low Pass Switched Capacitor is the type of filter for this part.This device should work with a power source of 5V~12V.There are a total of 16 8 pins on the board.Device components with TLC14s are the best.In terms of frequency, it is at a cutoff or center frequency of 30kHz.A peak reflow temperature of 260 is reached.In order to power the component at all times, a source of 5V must be present at all times.In order for it to work properly, it should be warmer than -40°C.The maximum working temperature at present is 85°C.There is no change in the pin number of the component, as 8 remains the same.There are a number of 8 terminals present on the device.Circuits of the 1 type exist.Filter can wFilterhstand a maximum supply temperature of 3mA.It's included in the Surface Mount mount.This DC DC switching regulator operates off a supply voltage of 9V.Filter can still operate accurately at 3MHz frequency.Only 6V supply voltage can be used to operate it.The device requires a voltage supply of 2.25V in order to function properly.

TLC14IDG4 Features
Supply voltage of 5V
Maximum operating temperature of 85°C
1 circuits
Mount of Surface Mount
3MHz frequency

TLC14IDG4 Applications
There are a lot of Texas Instruments TLC14IDG4 active filters applications.

Tuning Bandwidth Expansion for HSP45116 and HSP45106
Polyphase Flterng
lmage Filtering
Processing
High- performance digital low-pass filters
Simple, inexpensive video D/A post-ilters
Image mixing and keying
Real Time Video Filters
Video Signal Processing
Zoom Spectral Analysis