Texas Instruments TL16PC564BGGM
- Part Number:
- TL16PC564BGGM
- Manufacturer:
- Texas Instruments
- Ventron No:
- 3182330-TL16PC564BGGM
- Description:
- IC TX/RCVR PCMCIA/UART 100-BGA
- Datasheet:
- TL16PC564B
Texas Instruments TL16PC564BGGM technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments TL16PC564BGGM.
- Mounting TypeSurface Mount
- Package / Case100-LFBGA
- Surface MountYES
- PackagingTube
- JESD-609 Codee0
- Pbfree Codeno
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)3 (168 Hours)
- Number of Terminations100
- Terminal FinishTIN LEAD
- Additional FeatureALSO OPERATES AT 3.3V SUPPLY
- Voltage - Supply3V~3.6V
- Terminal PositionBOTTOM
- Terminal FormBALL
- Peak Reflow Temperature (Cel)220
- Supply Voltage5V
- Terminal Pitch0.8mm
- Reach Compliance Codeunknown
- Reflow Temperature-Max (s)NOT SPECIFIED
- Pin Count100
- JESD-30 CodeS-PBGA-B100
- Qualification StatusCOMMERCIAL
- Operating Temperature (Max)70°C
- Temperature GradeCOMMERCIAL
- Number of Channels1, UART
- uPs/uCs/Peripheral ICs TypeSERIAL IO/COMMUNICATION CONTROLLER, SERIAL
- Clock Frequency60MHz
- Address Bus Width10
- Boundary ScanNO
- Low Power ModeNO
- External Data Bus Width8
- Number of Serial I/Os1
- Bus CompatibilityPCMCIA
- Data Transfer Rate-Max0.0140380859375 MBps
- Communication ProtocolASYNC, BIT
- FIFO's64 Byte
- With Modem ControlYes
- Height Seated (Max)1.4mm
- Length10mm
- Width10mm
- RoHS StatusNon-RoHS Compliant
TL16PC564BGGM Overview
There is a cost-effective package 100-LFBGA available.Transmission uses 1, UART channels.As far as packaging is concerned, Tube is used.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.Configuration of this device involves 100 terminations.In order to operate it, a supply voltage of 5V is required.In the present state, this electronic part is Obsolete.Data is communicated via 1 serial I/Os.Through Surface Mount, it can be mounted.UART operates wUARTh the supply voltage of 3V~3.6V.This device is an integrated circuit with 100 pins.This IC measures its clock frequency at 60MHz.UART is able to operate at the maximum temperature of 70°C.Moreover, it is also able to perform ALSO OPERATES AT 3.3V SUPPLY.
TL16PC564BGGM Features
1 serial I/Os
Clock frequency of 60MHz
ALSO OPERATES AT 3.3V SUPPLY
TL16PC564BGGM Applications
There are a lot of Rochester Electronics, LLC TL16PC564BGGM UARTs applications.
Point-of- Sale Terminals
DTE for Modem Communication Systems
Factory automation and process control
Ethernet Network Routers
Communications equipment
Handheld Computers
Domestic Applications
Industrial computing
Personal Digital Assistants
Remote Access Servers
There is a cost-effective package 100-LFBGA available.Transmission uses 1, UART channels.As far as packaging is concerned, Tube is used.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.Configuration of this device involves 100 terminations.In order to operate it, a supply voltage of 5V is required.In the present state, this electronic part is Obsolete.Data is communicated via 1 serial I/Os.Through Surface Mount, it can be mounted.UART operates wUARTh the supply voltage of 3V~3.6V.This device is an integrated circuit with 100 pins.This IC measures its clock frequency at 60MHz.UART is able to operate at the maximum temperature of 70°C.Moreover, it is also able to perform ALSO OPERATES AT 3.3V SUPPLY.
TL16PC564BGGM Features
1 serial I/Os
Clock frequency of 60MHz
ALSO OPERATES AT 3.3V SUPPLY
TL16PC564BGGM Applications
There are a lot of Rochester Electronics, LLC TL16PC564BGGM UARTs applications.
Point-of- Sale Terminals
DTE for Modem Communication Systems
Factory automation and process control
Ethernet Network Routers
Communications equipment
Handheld Computers
Domestic Applications
Industrial computing
Personal Digital Assistants
Remote Access Servers
TL16PC564BGGM More Descriptions
Tube S-PBGA-B100 ALSO OPERATES AT 3.3V SUPPLY 0.0140380859375MBps interface UART 70C 10mm 60MHz 64Byte
SINGLE UART WITH 64-BYTE FIFOS, PCMCIA INTERFACE
IC TX/RCVR PCMCIA/UART 100-BGA
UARTs Sngl UART w/64-Byte FIFOs PCMCIA Ifc
The TL16PC564B/BLV is designed to provide all the functions necessary for a Personal Computer Memory Card International Association (PCMCIA) universal asynchronous receiver transmitter (UART) subsystem interface. This interface provides a serial-to-parallel conversion for data to and from a modem coder-decoder/digital signal processor (CODEC/DSP) function to a PCMCIA parallel data-port format. A computer central processing unit (CPU), through a PCMCIA host controller, can read the status of the asynchronous communications element (ACE) interface at any point in the operation. Reported status information includes the type of transfer operation in process, the status of the operation, and any error conditions encountered. Attribute memory consists of a 256-byte card information structure (CIS) and eight 8-byte card configuration registers (CCR). The CIS, implemented with a dual-port random-access memory (DPRAM), is available to both the host CPU and subsystem (modem), as are the CCRs. This DPRAM is used in place of the electrically erasable programmable read-only memory (EEPROM) normally used for the CIS. At power up, attribute memory is initialized by the subsystem. The TL16PC564B/BLV uses a TL16C550 ACE-type core with an expanded 64 11 receiver first-in-first-out (FIFO) memory and a 64 8 transmitter FIFO memory. The receiver trigger logic flags have been adjusted in order to take full advantage of the increased capacity when in the extended mode. In addition, eight of the UART registers have been mapped into the subsystem (modem) memory space as read-only registers. This allows the subsystem to read UART status information. A subsystem-selectable serial-bypass mode has been implemented to allow the subsystem to bypass the serial portion of the UART and write directly to the receiver FIFO and read directly from the transmitter FIFO. Interrupt operation is not affected in this mode.
SINGLE UART WITH 64-BYTE FIFOS, PCMCIA INTERFACE
IC TX/RCVR PCMCIA/UART 100-BGA
UARTs Sngl UART w/64-Byte FIFOs PCMCIA Ifc
The TL16PC564B/BLV is designed to provide all the functions necessary for a Personal Computer Memory Card International Association (PCMCIA) universal asynchronous receiver transmitter (UART) subsystem interface. This interface provides a serial-to-parallel conversion for data to and from a modem coder-decoder/digital signal processor (CODEC/DSP) function to a PCMCIA parallel data-port format. A computer central processing unit (CPU), through a PCMCIA host controller, can read the status of the asynchronous communications element (ACE) interface at any point in the operation. Reported status information includes the type of transfer operation in process, the status of the operation, and any error conditions encountered. Attribute memory consists of a 256-byte card information structure (CIS) and eight 8-byte card configuration registers (CCR). The CIS, implemented with a dual-port random-access memory (DPRAM), is available to both the host CPU and subsystem (modem), as are the CCRs. This DPRAM is used in place of the electrically erasable programmable read-only memory (EEPROM) normally used for the CIS. At power up, attribute memory is initialized by the subsystem. The TL16PC564B/BLV uses a TL16C550 ACE-type core with an expanded 64 11 receiver first-in-first-out (FIFO) memory and a 64 8 transmitter FIFO memory. The receiver trigger logic flags have been adjusted in order to take full advantage of the increased capacity when in the extended mode. In addition, eight of the UART registers have been mapped into the subsystem (modem) memory space as read-only registers. This allows the subsystem to read UART status information. A subsystem-selectable serial-bypass mode has been implemented to allow the subsystem to bypass the serial portion of the UART and write directly to the receiver FIFO and read directly from the transmitter FIFO. Interrupt operation is not affected in this mode.
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
12 January 2024
A Complete Guide to TXS0102DCUR Voltage Level Translator
Ⅰ. What is TXS0102DCUR?Ⅱ. Symbol, footprint and pin configuration of TXS0102DCURⅢ. What are the features of TXS0102DCUR?Ⅳ. How does TXS0102DCUR work?Ⅴ. Specifications of TXS0102DCURⅥ. Price and inventory of... -
12 January 2024
SN74LVC1G08DBVR Characteristics, Specifications, Layout, Advantages and Applications
Ⅰ. SN74LVC1G08DBVR overviewⅡ. Characteristics of SN74LVC1G08DBVRⅢ. The specifications of SN74LVC1G08DBVRⅣ. Layout of SN74LVC1G08DBVRⅤ. What are the advantages of SN74LVC1G08DBVR?Ⅵ. Where is SN74LVC1G08DBVR used?Ⅶ. How to use SN74LVC1G08DBVR?SN74LVC1G08DBVR is... -
15 January 2024
Performance and Applications of TMS320VC5502PGF300 Digital Signal Processor
Ⅰ. What is a digital signal processor?Ⅱ. Introduction to TMS320VC5502PGF300Ⅲ. Specifications of TMS320VC5502PGF300Ⅳ. Performance of TMS320VC5502PGF300Ⅴ. CPU architecture of TMS320VC5502PGF300Ⅵ. Applications of TMS320VC5502PGF300Ⅶ. Package of TMS320VC5502PGF300Ⅷ. What are... -
15 January 2024
SN75176BDR Characteristics, Working Principle and Applications
Ⅰ. Overview of SN75176BDRⅡ. Specifications of SN75176BDRⅢ. What are the characteristics of SN75176BDR?Ⅳ. Symbol, footprint and pin configuration of SN75176BDRⅤ. Simplified schematic of SN75176BDRⅥ. How does SN75176BDR work?Ⅶ....
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.