THS4031ID

Texas Instruments THS4031ID

Part Number:
THS4031ID
Manufacturer:
Texas Instruments
Ventron No:
3689479-THS4031ID
Description:
IC OPAMP VFB 100MHZ 8SOIC
ECAD Model:
Datasheet:
THS4031ID

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Texas Instruments THS4031ID technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments THS4031ID.
  • Factory Lead Time
    6 Weeks
  • Lifecycle Status
    ACTIVE (Last Updated: 5 days ago)
  • Contact Plating
    Gold
  • Mounting Type
    Surface Mount
  • Package / Case
    8-SOIC (0.154, 3.90mm Width)
  • Surface Mount
    YES
  • Number of Pins
    8
  • Weight
    75.891673mg
  • Operating Temperature
    -40°C~85°C
  • Packaging
    Tube
  • JESD-609 Code
    e4
  • Pbfree Code
    yes
  • Part Status
    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • ECCN Code
    EAR99
  • Subcategory
    Operational Amplifier
  • Max Power Dissipation
    629mW
  • Technology
    BIPOLAR
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Supply Voltage
    15V
  • Base Part Number
    THS4031
  • Pin Count
    8
  • Number of Channels
    1
  • Operating Supply Current
    8.5mA
  • Nominal Supply Current
    8.5mA
  • Power Dissipation
    629mW
  • Slew Rate
    100V/μs
  • Amplifier Type
    Voltage Feedback
  • Common Mode Rejection Ratio
    90 dB
  • Current - Input Bias
    3μA
  • Voltage - Supply, Single/Dual (±)
    9V~32V ±4.5V~16V
  • Output Current per Channel
    90mA
  • Input Offset Voltage (Vos)
    2mV
  • Bandwidth
    100MHz
  • Gain Bandwidth Product
    120MHz
  • Neg Supply Voltage-Nom (Vsup)
    -15V
  • Unity Gain BW-Nom
    200000 kHz
  • Voltage Gain
    95dB
  • Power Supply Rejection Ratio (PSRR)
    85dB
  • Low-Offset
    NO
  • Frequency Compensation
    YES
  • Voltage - Input Offset
    500μV
  • Settling Time
    60 ns
  • Low-Bias
    NO
  • Micropower
    NO
  • 3db Bandwidth
    90MHz
  • Bias Current-Max (IIB) @25C
    6μA
  • Programmable Power
    NO
  • Dual Supply Voltage
    9V
  • Max I/O Voltage
    2mV
  • Input Offset Current-Max (IIO)
    0.25μA
  • Input Voltage Noise Density
    1.6nV/sqrt Hz
  • Height
    1.75mm
  • Length
    4.9mm
  • Width
    3.91mm
  • Thickness
    1.58mm
  • Radiation Hardening
    No
  • REACH SVHC
    No SVHC
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Description
THS4031ID Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Voltage Feedback-type instrumentation amplifiers are used in this application. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 8.5mA . You should keep the voltage gain at 95dB for the time being. The op amp ic has 1 channels on it.

THS4031ID Features
8 Pins
supply voltage of 15V
95dB voltage gain

THS4031ID Applications
There are a lot of Texas Instruments THS4031ID Instrumentational OP Amps applications.

Weighing systems
Industrial applications including automation
Voltage regulation circuit
High speed sample
Automatic control
RF cable systems
Power generator
Radiation thermometry transducers
Video computer boards
Micro signal measurement
THS4031ID More Descriptions
100-MHz, single-channel low-noise voltage-feedback amplifier 8-SOIC -40 to 85
Operational Amplifier, Single, 100 Mhz, 1, 100 V/ S, 4.5V To 16V, Soic, 8 Rohs Compliant: Yes
ROHS3Compliant EAR99 THS4031 Tube op amp amplifier circuit 4.9mm 6muA 9V 200000kHz
Op Amp Single High Speed Amplifier ±16V/32V 8-Pin SOIC Tube
OP AMP, 100MHZ, SMD, 4031, SOIC8; No. of Amplifiers: 1 Amplifier; Bandwidth: 100MHz; Slew Rate: 100V/µs; Supply Voltage Range: ± 4.5V to ± 16V; Amplifier Case Style: SOIC; No. of Pins: 8Pins; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: -; Automotive Qualification Standard: -; MSL: MSL 1 - Unlimited; SVHC: No SVHC (27-Jun-2018); Amplifer Supply Voltage: ± 4.5V to ± 16V; Amplifier Type: Operational; Base Number: 4031; Gain Bandwidth: 90MHz; IC Generic Number: 4031; Input Offset Voltage Max: 2mV; No. of Amplifiers: 1Amplifiers; Op Amp Type: High Speed; Operating Temperature Range: -40°C to 85°C; Supply Voltage Nom: 32V; Supply Voltage Max: 33V; Supply Voltage Min: 9V
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.