Home > Products > Integrated Circuits (ICs) > Logic - Latches > SN74LVC841ADWRE4
SN74LVC841ADWRE4

SN74LVC841ADWRE4

Part Number:
SN74LVC841ADWRE4
Manufacturer:
Ventron No:
4546006-SN74LVC841ADWRE4
Description:
IC 10BIT BUS INT D LATCH 24-SOIC
ECAD Model:
Datasheet:
SN74LVC841ADWRE4

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
SN74LVC841ADWRE4 technical specifications, attributes, parameters and parts with similar specifications to SN74LVC841ADWRE4.
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    24-SOIC (0.295, 7.50mm Width)
  • Number of Pins
    24
  • Operating Temperature
    -40°C~85°C
  • Packaging
    Tape & Reel (TR)
  • Series
    74LVC
  • Pbfree Code
    yes
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    24
  • Subcategory
    FF/Latches
  • Packing Method
    TAPE AND REEL
  • Technology
    CMOS
  • Voltage - Supply
    1.65V~3.6V
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    NOT SPECIFIED
  • Number of Functions
    1
  • Supply Voltage
    1.8V
  • Reflow Temperature-Max (s)
    NOT SPECIFIED
  • Base Part Number
    74LVC841
  • Pin Count
    24
  • Qualification Status
    Not Qualified
  • Output Type
    Tri-State
  • Circuit
    10:10
  • Polarity
    Non-Inverting
  • Supply Voltage-Max (Vsup)
    3.6V
  • Power Supplies
    3.3V
  • Load Capacitance
    50pF
  • Number of Ports
    2
  • Number of Bits
    10
  • Propagation Delay
    6.7 ns
  • Turn On Delay Time
    2.7 ns
  • Family
    LVC/LCX/Z
  • Logic Function
    D-Type, Latch
  • Output Characteristics
    3-STATE
  • Current - Output High, Low
    24mA 24mA
  • Logic Type
    D-Type Transparent Latch
  • Number of Input Lines
    10
  • Independent Circuits
    1
  • Height Seated (Max)
    2.65mm
  • Width
    7.5mm
  • RoHS Status
    ROHS3 Compliant
Description
SN74LVC841ADWRE4 Overview
The product in question features a Surface Mount mount, belonging to the 74LVC series. It is also Pbfree, with a designated code of "yes". However, its Part Status is currently listed as Obsolete. The product has a total of 24 terminations and its Reflow Temperature-Max (s) is NOT SPECIFIED. Its Base Part Number is 74LVC841 and it currently holds a Qualification Status of Not Qualified. The Logic Function of this product is D-Type, Latch, and it has a width of 7.5mm. These parameters make it a highly versatile and efficient product for various electronic applications.

SN74LVC841ADWRE4 Features
24-SOIC (0.295, 7.50mm Width) package
74LVC series
10 Bits
74LVC841 family
24 pin count
24 pins
3.3V power supplies

SN74LVC841ADWRE4 Applications
There are a lot of Texas Instruments SN74LVC841ADWRE4 Latches applications.

Synchronous frequency dividers
Automotive Infotainment
Counters
Pseudo-random code generators
General-Purpose Register
Stacked or Push-Down Registers
Pattern generators
Data acquisition
Shift right with parallel loading
Shift left with parallel loading
SN74LVC841ADWRE4 More Descriptions
IC 10BIT BUS INT D LATCH 24-SOIC
10-BIT D-TYPE LATCH WITH 3-STATEThis 10-bit bus-interface D-type latch is designed for 1.65-V to 3.6-V VCC operation. The SN74LVC841A is designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The ten latches are transparent D-type latches. The device has noninverting data (D) inputs and provides true data at its outputs. A buffered output-enable (OE) input can be used to place the ten outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. OE does not affect the internal operations of the latch. Previously stored data can be retained or new data can be entered while the outputs are in the high-impedance state. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS
Popular Search Part Number Related Keywords Search Tags

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.