Texas Instruments SN74LV165APWR

SN74LV165APWR Overview
There is an embedded device in the package 16-TSSOP (0.173, 4.40mm Width). It sums up to 16 where the chip's terminations add up. A Tape & Reel (TR) case holds it. There is 2.5V operating supply voltage listed on the part. 1 elements make up this part. There are 16 pins on the device. It is recommended that the mount should be done by Surface Mount. There is an electronic component in the LV/LV-A/LVX/H. Surface Mount is the way this component is mounted. There is a temperature range of -40°C~125°C. It is supplied with voltage within 2V~5.5V. In this case, the electrical component belongs to the series 74LV. You can search for similar parts based on the 74LV165 family. Additional aspects of this section are as follows: SISO OPERATION ALSO AVAILABLE. The minimum supply voltage (Vsup) for this part should not be less than 2V. The device is capable of delivering voltage at 3.3V. Ideally, the maximum supply voltage (Vsup) should not exceed 5.5V. There are 8 bits in the IC chip. There is a quiescent current of 20μA running through it. There are 8 circuits in this device. There is a TR packaging for the part. There are 2 outputs available on this part.

SN74LV165APWR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV165 family
It supplies 3.3V power
Quiescent Current at 20μA
Packing Method : TR

SN74LV165APWR Applications
There are a lot of Texas Instruments SN74LV165APWR Shift Registers applications.

Pseudo Random Pattern Generator
ROM Chips
Cache memory in CPU
data manipulation
Serial-to-parallel data conversion
Serial-to-parallel data conversion
Remote control holding register
Remote control holding register
Interconnectors
Generate time delay toward digital circuits