Texas Instruments SN74HCT573NSRE4

SN74HCT573NSRE4 Overview
The SOP package contains it. As a result, it has a packaging of Tape and Reel. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. In order to function, the supply voltage should be set to 5V. There are 20 pins attached to it. It is a member of the HCT family of electronic devices. In addition, it is designed with a pin number of 20. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. There are 5V power supplies required for this machine to operate. High efficiency requires maintaining the supply voltage at 5V. Its superior flexibility is achieved by using 8 circuits. 6mA is set as the low level output current. It has been set to -6mA for the high level output current. Operating temperatures should be below 85°C. -40°C is the minimum operating temperature. There is a maximum voltage supply of 5.5V that can be applied to it. This device requires a minimum voltage of 4.5V. The logic IC it adopts is BUS DRIVER. With 6mA, maximum design flexibility is ensured.

SN74HCT573NSRE4 Features
SOP package
8 Bits
20 pin count
20 pins
5V power supplies

SN74HCT573NSRE4 Applications
There are a lot of Texas Instruments SN74HCT573NSRE4 Latches applications.

PCs and Notebooks
A/D converters
Parallel Input
Stacked or Push-Down Registers
Shift left register
Bus system register with enable parallel lines at bus side
Hammer
Network Switches
Automotive Cluster
Automotive Body Electronics