Texas Instruments SN74HC595DWR

SN74HC595DWR Overview
There is a 16-SOIC (0.295, 7.50mm Width) package embedded with the device. The number of the chip's terminations sums up to 16. Presented in a case of Cut Tape (CT). Voltage rating of the part is 5V. A total of 1 elements are present on this part. 16 pins are available on the device. It is recommended to mount by Surface Mount. Electronic components belong to the HC/UH group. Mounted in the same way as Surface Mount. There is a range of temperatures -40°C~85°C for operation. There is a votage of 2V~6V provided with it. In the 74HC series, this electrical component is found. With 74HC595 family search, you can find similar parts. The operating supply voltage of this chip is noted to be within the range 5V. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. This part should have a minimum supply voltage (Vsup) of at least 2V. There is a possibility of delivering voltage at 2/6V. Vsup cannot exceed 6V for this part. It is necessary to operate 10 output lines of the system. There is a quiescent current of 8μA in this circuit. There are 4 circuits in this device. There is a TR packaging for the part.

SN74HC595DWR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
Packing Method : TR

SN74HC595DWR Applications
There are a lot of Texas Instruments SN74HC595DWR Shift Registers applications.

Cache memory in CPU
Parallel data
Serial to parallel converter
Sequence generator
Interconnectors
Pseudo Random Pattern Generator
Delay Line
Data Format Converters
Flash Memory
Data manipulation