SN74BCT29843DWRG4

Part Number:: SN74BCT29843DWRG4

Manufacturer:

Ventron No:: 4546038-SN74BCT29843DWRG4

Description:: IC S-R LATCH SGL TRI-ST 24SOIC

ECAD Model:

Datasheet:: SN74BCT29843

Specifications

SN74BCT29843DWRG4 technical specifications, attributes, parameters and parts with similar specifications to SN74BCT29843DWRG4.

Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
24-SOIC (0.295, 7.50mm Width)
Number of Pins
24
Operating Temperature
0°C~70°C
Packaging
Tape & Reel (TR)
Series
74BCT
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
24
Additional Feature
WITH CLEAR AND PRESET
Subcategory
FF/Latches
Packing Method
TAPE AND REEL
Technology
BICMOS
Voltage - Supply
4.5V~5.5V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
1
Supply Voltage
5V
Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
74BCT29843
Pin Count
24
Qualification Status
Not Qualified
Output Type
Tri-State
Circuit
9:9
Polarity
Non-Inverting
Supply Voltage-Max (Vsup)
5.5V
Power Supplies
5V
Supply Voltage-Min (Vsup)
4.5V
Load Capacitance
50pF
Number of Ports
2
Number of Bits
9
Propagation Delay
8 ns
Turn On Delay Time
6 ns
Family
BCT/FBT
Logic Function
D-Type, Latch
Output Characteristics
3-STATE
Current - Output High, Low
24mA 48mA
Logic Type
D-Type Transparent Latch
Max I(ol)
0.048 A
Power Supply Current-Max (ICC)
35mA
Number of Input Lines
9
Independent Circuits
1
Height Seated (Max)
2.65mm
Width
7.5mm
RoHS Status
ROHS3 Compliant

Description

SN74BCT29843DWRG4 Overview
This component is manufactured by Texas Instruments and falls under the Logic - Latches category. It is a Logic - Latches chip that is designed to be mounted on the surface of a circuit board. It is packaged using the TAPE AND REEL method. The maximum temperature for reflowing this chip is not specified. The specific model number for this part is 74BCT29843. It has a maximum supply voltage of 5.5V and has 2 ports. The turn on delay time for this chip is 6 nanoseconds. It has 3-STATE output characteristics and is a D-Type Transparent Latch. The chip has a width of 7.5mm.

SN74BCT29843DWRG4 Features
24-SOIC (0.295, 7.50mm Width) package
74BCT series
9 Bits
74BCT29843 family
24 pin count
24 pins
5V power supplies

SN74BCT29843DWRG4 Applications
There are a lot of Texas Instruments SN74BCT29843DWRG4 Latches applications.

Watches
Parallel data synchronization
Communication systems
Timers
Automatic test equipment
Shift Registers
Parallel Output
Avionics
Shift left with parallel loading
Frequency

SN74BCT29843DWRG4 More Descriptions

IC S-R LATCH SGL TRI-ST 24SOIC
Contact for details
The SN74BCT29843 features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing wider buffer registers, I/O ports, bidirectional bus drivers with parity, and working registers. The nine latches are transparent D-type latches. When the latch-enable (LE) input is high, the Q outputs are complementary to the noninverting data (D) inputs. A buffered output-enable () input can be used to place the nine outputs in either a normal logic state (high or low level) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pull-up components. The output enable () does not affect the internal operation of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. The SN74BCT29843 is characterized for operation from 0°C to 70°C.

Certification