Texas Instruments OPA452TA-1

OPA452TA-1 Overview
There is a TO-220-7 (Formed Leads) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 7h termination of the year. In total, there are 3 pins on this op amp ic. This linear amplifier should be powered by an 40V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 7 pins are located on the operational amplifiers. The input offset voltage is 3mV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 5.5mA . There should be no change in the voltage gain at 110dB. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of the buffer op amp is rated at 40V.

OPA452TA-1 Features
3 Pins
supply voltage of 40V
110dB voltage gain


OPA452TA-1 Applications
There are a lot of Texas Instruments
OPA452TA-1 Instrumentational OP Amps applications.


Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation