ON Semiconductor NCP301HSN27T1

NCP301HSN27T1 Overview
As you can see, this power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes SOT-23-5 Thin, TSOT-23-5 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 240. When 1.5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. This power management has 5 pins. Supply voltage (Vsup) should be at least 800mV for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a 500nA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using NCP301, the base power ics number. A power supply of 4.7V watts is required for the operation of this power management. Voltage supervisor ic can handle 70mA currents.

NCP301HSN27T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
Current rating of 70mA


NCP301HSN27T1 Applications
There are a lot of ON Semiconductor
NCP301HSN27T1 Voltage Supervisors applications.


emergency room
Medical-specific isolation transformer
Medical-specific insulation monitor
Transformer load monitoring equipment
External alarm
Display equipment
DC stabilized power supply module
Insulation fault location system
Magnetic resonance imaging
Stable power system