Microchip Technology MIC5365-2.8YD5-TR

MIC5365-2.8YD5-TR Overview
A Cut Tape (CT) case is used to deliver this IC regulator. In SOT-23-5 Thin, TSOT-23-5 cases, it is packaged. This IC Regulator has a type of output called Fixed. The electronic part implements 1 regulators in total. Surface Mount operating temperature varies depending on the IC Voltage Regulator. Default settings are set to -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. In terms of its current output, it is able to supply 150mA. The regulator has a total of 1 outputs to make sure that it delivers prompt, sufficient outputs. In terms of its dropout voltage, it is 10 volts. It is MIC5365 for this regulator, just for your information. As a general rule, it is recommended that you use the IC voltage regulator when temperatures are below 125°C degrees Celsius. It is recommended that the chip be operated at a temperature no lower than -40°C operating temperature.

MIC5365-2.8YD5-TR Features
155mV dropout voltage
The maximum operating temperature of -40°C

MIC5365-2.8YD5-TR Applications
There are a lot of Microchip Technology MIC5365-2.8YD5-TR Linear Voltage Regulators applications.

Decoupling circuit
ADAS (Advanced Driver-Assistance System)
Set top boxes
Laboratory
RF (Radio Frequency)
Semi-automation
Pumps
Pressure sensor
Measurement and control euipment
HVAC (Heating, Ventilation, and Air Conditioning)