Maxim Integrated MAX7403CPA

MAX7403CPA Overview
A 8-DIP (0.300, 7.62mm) package is used to package it.Packaged in a Tube format.A Through Hole mount is used for mounting the gadget.The part's filter type is Elliptic, Low Pass Switched Capacitor.I believe it should be able to work with a power source of 4.5V~5.5V, if it works at all.There are a total of 16 8 pins on the board.Device components with a MAX7403 are the best.The device is at 10kHz frequency in cutoff or center.When 260 is reached, the peak reflow temperature has been reached.Components are powered by a 5V source at all times.During operation, it should be warmer than 0°C.At present, 70°C is the maximum temperature that can be reached.In this case, 8 refers to the component's pin number.A device with 5V supplies is being used.There are a number of 8 terminals on the device.There are 1 circuits.An operating temperature of 3.5mA is the maximum that it can handle for its supply.Operating off a supply voltage of 5V, this DC DC switching regulator.

MAX7403CPA Features
Supply voltage of 5V
Maximum operating temperature of 70°C
1 circuits

MAX7403CPA Applications
There are a lot of Maxim Integrated MAX7403CPA active filters applications.

High-performance FIR filters
Low Noise Differential Circuits
1-D and 2-D FIR Filters
Direct digital synthesis
Video Signal Processing
Complex Multiply-Add
Processing
Single-Ended to Differential Conversion/Amplification
Reduced cost and complexity for A/D anti-aliasing filters
Adaptive Filters