Maxim Integrated MAX691CWE

MAX691CWE Overview
There are 16 terminals on this power management that allow it to be mounted. Packaged in the form of a Tube, power management is easy to use. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a 16-SOIC (0.295, 7.50mm Width) package. There are a lot of similarities between this IC management and other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 5V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 16 pins on power management. Pin count of the power management is 16. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4.75V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: 0°C~70°C TA. During operation, this power management system outputs Push-Pull, Push-Pull. It is always advisable to use MAX691, the base supervisor number, when searching for similar PMICs from the manufacturer. This power management requires 5V power to work.

MAX691CWE Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V

MAX691CWE Applications
There are a lot of Maxim Integrated MAX691CWE Voltage Supervisors applications.

Data storage applications
Digitally controlled LDO regulators circuit
FPGA design
Embedded computing
Radar
Smart meter
DVR
Transformer load monitoring equipment
Microprocessor system
Consumer electronics