Maxim Integrated MAX4211BEUE

MAX4211BEUE Overview
Including buck boost converter in package Tube is a good idea.16-TSSOP (0.173, 4.40mm Width) is the way in which voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.As a rule of thumb, the operating temperature should not exceed -40°C~85°C.Current regulator supports the input voltage of 4V~28V.A 16 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 16 termination.Current regulator belongs to the family MAX4211.In a computer or other communication constant current regulator, 16 pins are pronged contacts that provide a signal interface.If a 5VV power source is used as a power source to power the constant current, it should be able to function.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power converter employs.Channels are becoming stronger/weaker based on the following statistics: 1.In order to include these current regulations, there is a part called Power Management Circuits that includes them.A voltage greater than 2.7V should be applied to the supply (Vsup).A maximum current supply (Isup) is supplied for its operation when the boost converter reaches its limit (1.1mA).When the maximum supply voltage (Vsup) applied for its operation reaches 5.5V, the boost converter is considered to be operational.In order for current regulation to operate, current regulation requires 3/5V power supplies.

MAX4211BEUE Features
Tube package
MAX4211 family
3/5V power supplies

MAX4211BEUE Applications
There are a lot of Maxim Integrated MAX4211BEUE Current Regulation/Managements applications.

Transmission controls
Vehicle dynamic controls
Smart battery packs
Automotive current measurement
Over current monitor
Diesel injection controls
Over-current protection
Level translating
Programmable current source
Power management