Linear Technology LT1641-1IS8#PBF

LT1641-1IS8#PBF Overview
You can find it in the 8-SOIC (0.154, 3.90mm Width) package.In the current state, 1 channels are accessible.Tube-shaped packaging is used.Total terminations are 8.DUAL is the terminal position of the device.In total, it has 8 pins.The supply voltage 24V is necessary for high efficiency.Surface Mount sets it up.This electrical component is classified as Hot Swap Controller.The temperature should be set to -40°C~85°C to ensure reliable functioning.There are General Purpose applications available for the device.A feature of Latched Fault describes it.The device should be able to be powered by a 9V~80VV power source.The number LT1641 belongs to the LT1641 family.Power Management Circuits contains this gadget all by itself.The programmable features of this device are Current Limit, Fault Timeout, OVP, Slew Rate, UVLO.Presently, there is a sufficient supply of 2mA.To ensure normal operation, the supply voltage (Vsup) must be kept above 9V.80V is set for Vsup (maximum supply voltage).As far as the power supplies are concerned, the part has the character 9/80V.There is a maximum supply current of 5.5mA for its operation.This device can also be used to produce UNDERVOLTAGE LOCKOUT; OVERVOLTAGE PROTECTION as well.

LT1641-1IS8#PBF Features
The terminal position of 8
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO

LT1641-1IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1641-1IS8#PBF hot swap controllers applications.

Central office switching systems
Temperature monitor output
Current monitoring
Overvoltage protection
ISDN system
Undervoltage protection
Backplane
Networking
Electric vehicle
Redundant Array of Disks (RAID)