Texas Instruments LP3470IM5-4.63

LP3470IM5-4.63 Overview
A total of 5 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 1V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. Power managment ic pin count is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 500mV. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TJ . The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 16μA. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use LP3470, the base supervisor number, when searching for similar PMICs from the manufacturer.

LP3470IM5-4.63 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current


LP3470IM5-4.63 Applications
There are a lot of Texas Instruments
LP3470IM5-4.63 Voltage Supervisors applications.


Power distribution systems of ICU
Power distribution systems of CCU
emergency room
Medical-specific isolation transformer
Medical-specific insulation monitor
Transformer load monitoring equipment
External alarm
Display equipment
DC stabilized power supply module
Insulation fault location system