Texas Instruments LP339N

LP339N Overview
Electronic comparator is packaged in 14-DIP (0.300, 7.62mm) for convenient transportation.The comparator has an output type of CMOS, MOS, Open-Collector .This chip is designed with the Tube package.Electronic comparator is possible to find the 14 terminals of the comparator.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical General Purpose .A total of 4 elements can be found in it.As a result, it contains 14 pins.Electronic comparator is recommended that you mount the device using type Through Hole .The operating temperature should be set to 0°C~70°C to avoid mal-function.The comparator consists of 14 pins.In order to find a solution that meets your specific needs, search LP339 for more pin-to-pin solutions.This comparator presents a quiescent current of 100μA .A Through Hole is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 100μA .A current supply greater than 2mA may result in the comparator malfunctioning.A power supply of 5V is sufficient for the operation of the device.A maximum current of 25nA can be supplied to the device.A voltage gain of 113.98dB can be determined from the voltage formula for the part.

LP339N Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB

LP339N Applications
There are a lot of Texas Instruments LP339N linear comparators applications.

Battery-Powered Electronics
Wireless Base Stations
Analog front end
Notebooks and PDAs
Self-diagnostics
Mobile Phones and Tablets
Window Comparators, Multivibrators
Industrial
Point of load regulators
Hand-Held Electronics