Fairchild/ON Semiconductor LMV324AMTC14X

Name: LMV324AMTC14X
Brand: Fairchild/ON Semiconductor
SKU: 3192668-LMV324AMTC14X
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: LMV324AMTC14X

Manufacturer:: Fairchild/ON Semiconductor

Ventron No:: 3192668-LMV324AMTC14X

Description:: IC OPAMP VFB 1.4MHZ RRO 14TSSOP

ECAD Model:

Datasheet:: LMV324AMTC14X

Specifications

Fairchild/ON Semiconductor LMV324AMTC14X technical specifications, attributes, parameters and parts with similar specifications to Fairchild/ON Semiconductor LMV324AMTC14X.

Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-TSSOP (0.173, 4.40mm Width)
Number of Pins
14
Weight
55.3mg
Operating Temperature
-40°C~125°C
Packaging
Tape & Reel (TR)
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Base Part Number
LMV324
Output Type
Rail-to-Rail
Operating Supply Voltage
5.5V
Number of Elements
4
Operating Supply Current
100μA
Nominal Supply Current
80μA
Output Current
34mA
Slew Rate
1.5V/μs
Amplifier Type
Voltage Feedback
Common Mode Rejection Ratio
50 dB
Current - Input Bias
1nA
Voltage - Supply, Single/Dual (±)
2.7V~5.5V ±1.35V~2.75V
Output Current per Channel
34mA
Input Offset Voltage (Vos)
7mV
Bandwidth
1.4MHz
Voltage Gain
70dB
Power Supply Rejection Ratio (PSRR)
50dB
Voltage - Input Offset
1mV
RoHS Status
RoHS Compliant
Lead Free
Lead Free

Description

LMV324AMTC14X Overview
Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the Voltage Feedback type. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 7mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 100μA, this op amp ic can operate. 70dB should remain the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 4 different elements in total. The operating supply voltage of the buffer op amp is rated at 5.5V.

LMV324AMTC14X Features
70dB voltage gain
Output Type: Rail-to-Rail

LMV324AMTC14X Applications
There are a lot of ON Semiconductor
LMV324AMTC14X Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

LMV324AMTC14X More Descriptions

RoHS Compliant LMV324 Tape & Reel (TR) Obsolete op amp amplifier circuit 55.3mg 1nA 7mV 50dB
Operational Amplifiers - Op Amps Low Cost RRO amp General Purpose Quad
Operational Amplifier (Op-Amp) IC; No. of Amplifiers:4; Op Amp Type:Voltage Feedback; Gain Bandwidth -3db:1.4MHz; Slew Rate:1.5V/µs; Supply Voltage Min:2.5V; Supply Voltage Max:5.5V; No. of Pins:14 ;RoHS Compliant: Yes
The LMV324 (quad) is a low cost, voltage feedback amplifier that consumes only 80 µA of supply current per amplifier. The LMV3XX familyis designed to operate from 2.7 V (1.35 V) to 5.5 V (2.75 V) supplies. The common mode voltage range extends below the negative rail and the output provides rail-to-rail performance.The LMV3XX family is designed on a CMOS process andprovides 1.2 MHz of bandwidth and 1.5 V/µs of slew rate at alow supply voltage of 2.7 V. The combination of low power, rail-to-rail performance, low voltage operation, and tiny package options make the LMV3XX family well suited for use in personal electronics equipment, such as cellular handsets, pagers, PDAs, and other battery-powered applications.

Certification