Texas Instruments LMC6772AIM

LMC6772AIM Overview
The terminal finish for this electronic component is Tin/Lead (Sn/Pb), which is a common material used in the manufacturing of electronic devices. The terminal position is DUAL, meaning there are two terminals on opposite sides of the component. The peak reflow temperature is 235 degrees Celsius, indicating the maximum temperature at which the component can be soldered onto a circuit board. The supply voltage for this component is 5V, which is the amount of voltage needed for it to function properly. It has a pin count of 8, meaning there are 8 pins that connect it to the circuit board. With a common mode rejection ratio of 75 dB, this component is able to filter out unwanted noise and interference. The maximum supply voltage limit is 16V, ensuring that the component is not damaged by excessive voltage. It also has a CMRR and PSRR of 75dB and 80dB respectively, indicating its ability to reject common mode and power supply noise. The typical output current for this component is 30mA, which is the amount of current it can deliver to the circuit. With a length of 4.9mm, this component is compact and can easily fit into small electronic devices.

LMC6772AIM Features
Open Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB

LMC6772AIM Applications
There are a lot of Texas Instruments LMC6772AIM linear comparators applications.

Automatic Test Equipment
Window Comparators
Pulse, Squarewave, and Time Delay Generators
Wearable Devices
RC Timers
General-Purpose Portable Devices
Power Supervision
Mobile Phones and Tablets
Infotainment and Clusters
Window Comparators, Multivibrators